Tiny particles of suspended dirt, plaster dust, dead algae and other debris may pass right through the filter causing the water to turn dull and cloudy and increase the cost of maintaining the pool. Sparkle Up is a dual purpose product that will remove these tiny particles and also aid in the removal of metals from the pool water. For the metal removal process, use Sparkle Up in conjunction with BioGuard Pool Magnet.

Product Benefits:

• Restores sparkle to water
• Facilitates the removal of metals
• Works on all types of pools
• Helps filter smaller particles
• Safe on all types of filters
• Effectively creates a filter within a filter
• Backwash as needed based on filter pressure

Dosage for DE Filters:

• Thoroughly backwash filter, clean skimmer basket and hair & lint basket
• Set filter to normal position
• Prepare a mixture of 1 part Sparkle Up and 2 parts D.E. in a clean bucket of water in sufficient quantity to make up the normal filter charge
• Pour this slurry solution through the skimmer with the pump running
• Under no circumstances should filter pressure be allowed to exceed that of the mfg

Dosage for Sand Filters:

• Thoroughly backwash filter and return to normal position
• Add Sparkle Up according to general Dosage Direction. (Use cup provided with Sparkle Up)
• Backwash after 24 hours or before then if pressure reaches maximum level.

Dosage for Cartridge Filters:

• Remove, clean and replace cartridge, then with pump running, add 8 cups of Sparkle Up per 100 square feet of filter area
• Clean when pool clears, or if filter pressure reaches manufacturer's recommended maximum psi