EMAS IF5T024XM05-1 | 3 Colour LED Light Tower 1M Cable (IP65 24V DC PNP)

IF SERIES THREE LEVEL 24V AC/DC 1MT CABLE CONSTANT KEY CONTROL M22 SCREW LED BEACON 55MM The IF5T024XM05-1 stacks Red, Amber, and Green into one 55mm tower, letting each level illuminate individually or together for a full three-state machine status signal from a single 22mm mounting hole. Simple PNP wiring means you apply 24V DC directly to whichever colour you need lit, with an optional integrated buzzer if audible alerting is also required. 3 levels: Red, Amber, Green Illuminate individually or simultaneously Flashing can be achieved from PLC or command wire Heat resistant, clear vision Polycarbonate Monoblock construction Easy PNP wiring, apply 24VDC to the colour you wish to illuminate Simple installation to 22mm hole Buzzer or no buzzer optional models EMAS IF5 IF6 LED Beacon User Manual Technical Details Operational Frequency 50 Hz Operational Voltage 24V AC/DC Product LED Beacon 55mm Control Key Control Mounting M22 Screw Color Three Level Illumination Constant Cable 1mt Cable Insulation Voltage (Ui) 300V Operating Temperature -25 °C /+70 °C Protection Degree IP65 Cable Section Cable 0,50 mm2 Serial IF Series Electrical Life (Min Hour) 10,000 Hours Frequently Asked Questions Can all three colours be lit at once? Yes — each level (Red, Amber, Green) can be illuminated individually or simultaneously, so you can build combined status signals (e.g. amber+red for "fault, awaiting reset") rather than being limited to one colour at a time. Do I need a separate buzzer, or can I get one built in? Both options are available — this listing includes a "With Buzzer" variant (IF5T024ZM05-1) alongside the standard light-only version, so you can add audible alerting without sourcing a separate unit. Can I get flashing rather than constant illumination? Flashing can be achieved by driving the relevant colour wire from a PLC output or command wire — the beacon itself doesn't need a separate flashing mode variant for this. What does "Key Control" mean for wiring? It refers to the simple PNP wiring scheme — you apply 24V DC directly to whichever colour wire you want lit, with no additional control logic needed inside the beacon. Industry Applications Machine status towers — full run/warning/fault signalling from a single compact 22mm-mount beacon Production lines & cells — combined light + optional buzzer for at-a-glance and audible status from the same unit Outdoor & harsh environments — IP65 rating suits exposed or washdown-adjacent installations

EMAS IF5T024XM05-1 | 3 Colour LED Light Tower 1M Cable (IP65 24V DC PNP)

IF SERIES THREE LEVEL 24V AC/DC 1MT CABLE CONSTANT KEY CONTROL M22 SCREW LED BEACON 55MM

The IF5T024XM05-1 stacks Red, Amber, and Green into one 55mm tower, letting each level illuminate individually or together for a full three-state machine status signal from a single 22mm mounting hole. Simple PNP wiring means you apply 24V DC directly to whichever colour you need lit, with an optional integrated buzzer if audible alerting is also required.

3 levels: Red, Amber, Green
Illuminate individually or simultaneously
Flashing can be achieved from PLC or command wire
Heat resistant, clear vision Polycarbonate
Monoblock construction
Easy PNP wiring, apply 24VDC to the colour you wish to illuminate
Simple installation to 22mm hole
Buzzer or no buzzer optional models

EMAS IF5 IF6 LED Beacon User Manual

Technical Details

Operational Frequency

50 Hz

Operational Voltage

24V AC/DC

Product

LED Beacon 55mm

Control

Key Control

Mounting

M22 Screw

Color

Three Level

Illumination

Constant

Cable

1mt Cable

Insulation Voltage (Ui)

300V

Operating Temperature

-25 °C /+70 °C

Protection Degree

IP65

Cable Section

Cable 0,50 mm2

Serial

IF Series

Electrical Life (Min Hour)

10,000 Hours

Frequently Asked Questions

Can all three colours be lit at once?
Yes — each level (Red, Amber, Green) can be illuminated individually or simultaneously, so you can build combined status signals (e.g. amber+red for "fault, awaiting reset") rather than being limited to one colour at a time.

Do I need a separate buzzer, or can I get one built in?
Both options are available — this listing includes a "With Buzzer" variant (IF5T024ZM05-1) alongside the standard light-only version, so you can add audible alerting without sourcing a separate unit.

Can I get flashing rather than constant illumination?
Flashing can be achieved by driving the relevant colour wire from a PLC output or command wire — the beacon itself doesn't need a separate flashing mode variant for this.

What does "Key Control" mean for wiring?
It refers to the simple PNP wiring scheme — you apply 24V DC directly to whichever colour wire you want lit, with no additional control logic needed inside the beacon.

Industry Applications

Machine status towers — full run/warning/fault signalling from a single compact 22mm-mount beacon
Production lines & cells — combined light + optional buzzer for at-a-glance and audible status from the same unit
Outdoor & harsh environments — IP65 rating suits exposed or washdown-adjacent installations