Notes:
This model belongs to self-learning and can be read by OBD companies normally. But if it cannot be read, it can be activated according to the general activation steps, as follows:
Learning Process Guide
It is necessary to use appropriate tire pressure monitoring system tools to learn new sensor IDs.
Relearning program:
1. Install the tire pressure sensor correctly.
2. Ensure that all tires have been inflated to the pressure listed on the tire label (located at the blocked door of the vehicle).
Starting from the LF tire, use the tire pressure monitoring system tool to trigger each sensor in the following order: LF, RF, RR, LR, and amp; Full size spare parts (if equipped).
4. Turn the ignition switch to the ON position.
5. Connect the tire pressure monitoring system tool to the OBD II port and write the sensor ID.
6. Turn off the ignition switch, then turn on the ignition switch.
7. Test drive at a speed of over 30 kilometers per hour (19 miles per hour) for at least 10 minutes to ensure that the tire pressure monitoring system is working properly (tire pressure monitoring light goes out).
Specifications:
* Manufacturer Part Number:A0009052102, 0009052102
* Interchange Part Number: 36106877937
* Condition: 100% Brand New
* Material: Premium Plastic & Metal
* Surface Finish: Black
* Fitment Type: Direct Replacement
* Mounting Method: Clamp In
* Type: TPMS Tire Pressure Sensor
* Placement on Vehicle: Left, Right, Front, Rear
* Waterproof Grade: IP67
* Operating Frequency: 433 MHz
* Operating Voltage: 2.1V~3.6V
* Operating Temperature：-40°C to +125°C
Compatible Models and Years:
For 2018 Mercedes-Benz E300 4Matic Sedan 4-Door
For 2018 Mercedes-Benz E300 Base Sedan 4-Door
For 2018 Mercedes-Benz E300 Convertible Convertible 2-Door
For 2018 Mercedes-Benz E300 Coupe Coupe 2-Door
For 2018 Mercedes-Benz E400 4Matic Convertible 2-Door
For 2018 Mercedes-Benz E400 4Matic Coupe 2-Door
For 2018 Mercedes-Benz E400 4Matic Exclusive Sedan 4-Door
For 2018 Mercedes-Benz E400 4Matic Sedan 4-Door
For 2018 Mercedes-Benz E400 4Matic Sport Sedan 4-Door
For 2018 Mercedes-Benz E400 4Matic Wagon 4-Door
For 2018 Mercedes-Benz E400 Base Convertible 2-Door
For 2018 Mercedes-Benz E400 Base Coupe 2-Door
For 2018 Mercedes-Benz E43 AMG 4Matic Sedan 4-Door
For 2018 Mercedes-Benz E43 AMG Base Sedan 4-Door
For 2017 Mercedes-Benz E300 4Matic Sedan 4-Door
For 2017 Mercedes-Benz E300 Base Sedan 4-Door 2.0L
For 2017 Mercedes-Benz E43 AMG 4Matic Sedan 4-Door
For Mercedes-Benz E-Class W213 / S213 (from 2015/11)
For Mercedes-Benz A-Class W177 / Z177 / V177 (from 2018/05)
For Mercedes-Benz CLS A257 (from 2018/03)
for Mercedes-Benz AMG GT 53 2019-2021
for Mercedes-Benz AMG GT 63 2019-2021
for Mercedes-Benz AMG GT 63 S 2019-2021
for Mercedes-Benz CLS 450 2019 2020
for Mercedes-Benz CLS 53 AMG 2019 2020
for Mercedes-Benz E 300 2017-2019
for Mercedes-Benz E 350 2020
for Mercedes-Benz E 400 2017 2018
for Mercedes-Benz E 43 AMG 2017 2018
for Mercedes-Benz E 450 4Matic 2019 2020
for Mercedes-Benz E 53 AMG 2019 2020
for Mercedes-Benz E 63 AMG 2018
for Mercedes-Benz E 63 AMG S 2018-2020
for Mercedes-Benz G 550 2019-2021
for Mercedes-Benz G 63 AMG 2019-2021
Note:
Remove the original tire pressure sensor and install the new one;
After installation, please park the car and turn off the engine for about 20 minutes, and keep the remote control key 5 meters away from car;
Then start the vehicle and keep it running at a rate of 25 km/h above for 5-10 minutes to match the TPMS sensor;
If the outdoor temperature is below 0, the matching time may be longer, which is normal. Please wait patiently for the matching. If you still have problems, please contact when you are free.
You need to use a professional computer to correctly match the ID, and then run a certain distance before it can be compatible and work properly.
Parcel Content:
- 4PCS TPMS Sensor
