Precision Beeman / Barra Airguns

'Mk9 Lane Lancet Professional Air Regulator Kits
Used in and winning competitions in 170 Countries

A "Must" - 'For The Serious Air Gun Enthusiast'.
'Whom Wishes To Tune Their Rifle & Gain The Very Best Results From His / Her Equipment'.

The Lane Regulator fitted correctly will: Stabilize Shot to Shot (Feet Per Second) Consistency at the muzzle, Which leads to greatly Improved Accuracy & Air  Efficiency, Whether Competing in FT, HFT / Hunting or Plinking at the range. 

Option 1: 3/4" Reservior I.D. - Reg 18.86mm Nom.

Beeman QB78 (HPA = High Pressure Air)

Beeman Underlever 1357 & 1358 models with 3/4" 19.04mm I.D. Reservior Tubes.

Option 2 Makes Up 90% Of Sales

Option 2: 7/8" Reservior I.D. or 22mm - Reg 21.78mm Nom.

RAIDER CHIEF / CHIEF II / - BARRA 1100Z

Beeman Underlever 1357 & 1358 models with 7/8" - 22mm I.D. Reservior Tubes

But 'NOT' those with a pressure gauges half way (1/2 way) down the length of the barrel, as in a a full 1/2 way between the breach block face and muzzel end.

Option 3: 25.20mm Reservior I.D. - Reg 24.95mm Nom.

CHIEF or COMMANDER

Option 4: 28.50mm Reservior I.D.- Reg 28.24mm Nom.

CHIEF or COMMANDER

Option 5: 30.00mm Reservior I.D.- Reg 29.78mm Nom.

CHIEF or COMMANDER

What Is In The Kit?
1: 'Lancet' MK9 Regulator

check size of I.D. before purchase.

2: Stand Off / Plenum Tube

3: Outlet Valve Spring Packers

4:  A Complete Spare O-Ring Seals Kit
5:  Sachet of Silicone O-Ring Grease

6: Drill bit were required

What Calibre Is It Suitable For ?
It can be used in all calibers
Yes:   .177   .20   .22   .25

What Pressure Is The Regulator Set At ?
Each regulator is pre-tested and adjusted to suit your project 130bar.
Yes: Can Be adjusted   30bar  - to - 150bar

Is this product available world wide?
We ship too 170 Countries"

For far more details upon this series of regulators as well as for the most informative
and comprehensive information upon airgun regulators available in anywhere world wide
view all the relevant videos & FAQ’s upon Lane Regulators

Before you order, please be aware: The word Regulator is used in reference to this product being a Pressure Regulator and not a Power Regulator or tool for Adjusting Power Higher. The Regulator will only keep an airguns power FT LBS / Joules to the power at which it has already been - tuned to - at a - set working pressure. A Regulator, no matter what make or model, is nothing more or less than a very simple and basic pressure switch, which opens and closes to keep air pressure at the outlet valve near to a constant pressure down to its set working pressure. If you are unsure what a regulator is or the purpose of its function, there is an in depth article on 'What Is A Regulator' on the company manuals page. So like in the Article on the web page 'What Is A Regulator' please don't think that purchasing a regulator is an easy or simply fix for many woes. You should full understanding what an air regulator is, what it does and its principles of operation, along with those of your PCP and how they work and interact together.

Before you order, please be aware: Lane Regulators and other associated products are aimed at and for the gunsmith / airgun professional / serious enthusiast whom has both Machinery & Fitting Knowledge as well as practical experience of problem solving, in particularly air leaks (All items are tested prior to dispatch) whom ideally has their own or access to tools and workshop facilities. We do not know / judge you or your third parties skill set or the facilities available to you / them. This is yours decision to take. Many models of airgun vary slightly from country to country across the globe, and in some instances from batch to batch. You the customer must understand that a degree of alteration may be required to either or both the Regulator / Product / PCP to both fit and get the best out of what you have purchased.

Lane Regulators have been manufactured for 25+ years and are are sold on a -  self fit,  self service,  self maintain basis - As the greatest % of sales are overseas all regulators are tested prior to dispatch for leaks and set working pressure. All the manuals for pressure adjustment, stripping down, servicing and general maintenance are available as PDF Downloads upon the companies manuals page.

Lane Regulators are both sturdy and robust in design and will last a lifetime if looked after carefully. They are designed to be simple to service and maintain consisting of only three parts, of which two are working parts and only one moving part which engages with just two O-rings...