JJBP 15mm to 12mm Fork Thru Axle Conversion Kit for the Canyon Endurace 15x100mm thru axle disc fork. Kit includes the following:
- Thread adapter: M15x1.5mm pitch external thread, 10mm long, M12x1.5mm internal thread
- Thru Hole Insert: 15mm OD x 12mm ID, 10mm long
- Axle: 12mm x 126mm long, M12x1.5mm threads
Installation Notes:
1. Thread adapter has thread locker pre-applied. Use mild heat (hair dryer or heat gun on low) to soften thread locker if difficult to install.
2.
Use Park Tool SPA-2 or equivalent 2.3mm pin spanner to tighten thread
adapter into fork. Flange goes on the OUTSIDE (see third picture).
3.
Use grease on o-ring of thru hole insert and install into fork with a
combined pushing and twisting motion. Do NOT use thru axle to drive thru
hole insert into the fork.
4. Use grease threads of thru axle. Torque 9-13 N*m with 5mm hex.
See other auction for many more sizes! Kits are available for nearly every 15mm thru axle fork ever made.
Please contact me with any questions!
A note on international shipping: where applicable, when USPS First Class International shipping is selected you will be automatically upgraded to FedEx International Connect Plus (4-8 day transit time typically). Some locations are prohibitively expensive for this service (4-5 times higher than average) and as such will still receive standard USPS or Ebay International delivery. Please contact me with me any questions about transit time.