The VGA2SCART is used to convert RGBHV (VGA) to RGBs (SCART), so that you can use games consoles and other devices that output VGA to a monitor, TV or scaler that only accepts SCART connections.
Features:
- Converts 15/31khz RGBHV (VGA) to 15/31khz RGBs (SCART).
- Designed primarily for use with retro games.
- Zero lag – lag of less than 0.01ms (effectively ZERO).
- Accurate picture – does not produce a dim image as with some similar products.
- No power supply required! Powered by VGA pin 9 or Micro USB which is selectable by the on-board jumper.
- Supports 240p, 480i & 480p (320x240p, 640×480 interlaced and progressive) if your SCART device is able to handle the resolution being output.
- 3D printed enclosure optional via drop-down menu.
- Low voltage SCART blanking via micro-USB to enable RGB mode on European SCART CRT TVs.
Specifications:
- Approx. Dimensions = 81 mm x 63 mm.
- Connector A = VGA D-SUB 15 + x 3.5mm audio jack input, Connector B = Female EuroSCART output.
- Current board revision: V1.3
- PCB Colour: Green
We also stock a cased version here: https://www.ebay.co.uk/itm/114363618169
Connecting a PC to a CRT TV:
Most consumer grade CRT TVs will be 15khz only yet most PCs will only output a 31khz+ signal. Therefore, we will need to output a 15khz signal from the PC. There are multiple ways to achieve this which are listed below:
- We recommend to use crt_emudriver or soft 15khz software if you have a compatible GPU. After setting up the software which can take some trial and error, connect a VGA cable from your PC to the V2S and a SCART cable from the V2S to your CRT TV.
- If you do not have a compatible GPU, you may try a HDMI to VGA adapter directly connected from your PC to the VGA2SCART along with CRU (Custom Resolution Utility) software. This option is not ideal as some HDMI to VGA adapters will perform unwanted sync processing. With this configuration you may need to try a few different adapters until you find one that works.
Other examples of use:
- Connect a MiSTer FPGA device to your consumer TV which only accepts SCART.
- Connect a VGA console to your RetroTINK 5X Pro.
- Connect Dreamcast 480p VGA to compatible SCART equipment.
- Converting HDMI “super-resolution” 240p from HDMI to VGA. CPSHDMI & Raspberry Pi can be set to 240p, then along with a cheap DAC and this converter, you can get the signal on your SCART monitor/TV.
Please note: The VGA2SCART is not a downscaler, but a sync converter. It will NOT downscale 480p to 480i or 240p. It simply converts a VGA 15/31khz RGBHV source to 15/31khz RGBs for use with SCART equipment.
Case design by Retro Upgrades. Thanks to Mike Chi of RetroTINK for designing the base of the VGA2SCART which we’ve modified to create the current iteration of the VGA2SCART.
Combining shipping for international orders:
We will always combine shipping costs on all orders. If you are purchasing multiple items from our store and the eBay website does not allow you to request to combine shipping when the items are in your cart, we will manually combine the costs after purchase and refund you the difference. Please message if you require a combined shipping quote beforehand.
EU shipping notice (no EU import tax or duty upon delivery) [updated 07/07/2026]: All orders with a total value of under 150 euros that are shipped to countries where the destination country is within the European Union include EU import tax and duty in both the product and shipping price. The price seen upon checkout is final, and you will not be subjected to any import tax, duty or handling fees upon delivery unless the total order value is above 150 euros. If you are ordering multiple items, the shipping costs on eBay are per item. Usually multiple items can fit inside one parcel. We will manually combine shipping costs so you only pay the correct amount as per above.
We also sell other audio & video equipment for retro gaming. Please check out our other listings.
Please feel free to message us if you have any questions.