Industrial Turbos
Professional Manufacture, Strict Quality Control test, High Quality Turbo Parts.  


Universal Performance&Racing Turbocharger 
Dual Ball Bearing & Billet Compressor Wheel
iTurbos GENII GTX2860R

SPECIFICATIONS:
- Dual Ceramic Ball Bearing system, better performance as factory turbo.
- Forged billet compressor wheel.
- Fit Vehicle: Universal turbo for performance use of 4 cylinder, 6 cylinder engines.
- Fit Engine: 1.4-2.5L and performance well for 200-450HP. 

TECHNICAL DATA:
Compressor wheel: Upgraded Billet Compressor
                                45.6mm/59.97mm, extended tip diameter 63mm 
Compressor Housing: 0.6 A/R Anti-Surge Ported Compressor housing
                                    3" V-Band Air Inlet, 2.0" V-Band Outlet

Cooling: Oil&Water cooled(highly recommended to use both to avoid over heating)                                

Turbine wheel: 53.9mm/47.15mm
Turbine housing: A/R 0.64, high resistant cast iron housing
                              T25 Inlet to manifold, 5-Bolt  discharge outlet 


What can you benefit from Forged Billet Compressor Wheel?

Stronger Wheel:
By using forged billet aluminum to make the wheel, there is no chance of minute air bubbles being in the mental. So, you don't need to worry  about porosity issues. That means billet compressor wheel is much  strong than cast compressor wheel.

Better Blades Design:
By using forged billet aluminum and machined on a 5-Axis mill, the  billet compressor wheel can be designed much more aggressive, the nose and hub can be designed significantly smaller to allow for a greater  blade diameter. And the blades can be made much more complicated to  increase blade surface area, which can flow more air into the  engine.

Lower Engine Intake Air Temperature:
By using forged billet aluminum, the wheel can be machined much thinner. This allows the wheel to have a greater efficiency range, because  their is less blade thickness to contact the air and heat it up. It  also means that with less blade thickness and lower hub area that  there is a greater area in-between the blades to squeeze more air and  build boost presure. The more efficient a wheel is the lower the  intake temps, and everyone knows the cooler the air going into the  engine the more horsepower you can make!
 
What can you benefit from our dual ball bearing turbocharger?

Reduced Turbo Lag:
Dual Ball Bearing turbochargers can spool up about 15% faster than traditional journal bearings, so it will signifcant reduce the turbo lag when the throttle is suddenly opened. This produces an improved response that can be converted to quicker  0-60 mph speed. In fact, when you drive with a dual ball bearing turbocharged engine, it will more like  driving a big, normally aspirated engine.

Reduced Oil Flow:
The Dual Ball Bearing design reduces the required amount of oil required to  provide adequate lubrication. This lower oil volume reduces the chance  for seal leakage. Also, the dual ball bearing is more tolerant of marginal  lube conditions, and diminishes the possibility of turbocharger failure  on engine shut down.

Improved Rotordynamics and Durability:
The Dual Ball Bearing cartridge gives better damping and control over shaft  motion, allowing enhanced reliability for both everyday and extreme  driving conditions. In addition, the opposed angular contact bearing  cartridge eliminates the need for the thrust bearing commonly a weak  link in the turbo bearing system.


PLEASE READ OUR POLICY BELOW BEFORE YOU BUY THIS ITEM!
                                                                                                               

OUR POLICY

-All taxes and duties arising outside China shall be borne by Buyer.

RETURN AND EXCHANGE

  • TIME LIMITS: 30 Days 
    We offer a 30 days return policy if the item is never installed and kept in it's original packaging. 
    Otherwise a 15% restocking fees will be charged. 
    If there is any damage to the package which caused the item inside to be damaged. Please notify us within 3 days, because of the shipping companies' claim policy. 
  • REFUND TYPE: Money back 
    we offer a "Money back" refund policy if the item is never installed with it's original packaging. 
    But before that, buyer MUST to contact us thru E-mail or eBay message to provide us a photo to show the item's condition, return without our approval will not be accepted.
  • REFUND SHIPPING CHARGE: Buyer 
    Normally, buyer will be responsible for the return shipping postage. 
    We will NOT charge the return shipping postage only when we shipped the wrong or defective item to you.
  • RESTOCKING FEE: free or 15% 
    Original Packaging: free! 
    Otherwise: 15%
  • ITEM RETURN CONDITION: Original Materials in original package.
  • INTERNATIONAL SALES 
    Shipping cost applies to Inland only. There will be additional charges to ship anywhere oversea. please contact us thru E-mail or eBay message to get a quote.

    • Please read all the details carefully before you buy it! DO NOT buy if you don't agree with our policy and items!

WARRANTY CLAIMS

  • Only items have warranty statement posted on the product detail pages can be eligible for warranty claims.
  • we will only replace or repair warranty items, no refunds will be given. 
  • Buyer is responsible for covering shipping postages to and from us.
  • Repair kits have no warrantee, GREAT CARE has been taken when selecting best quality parts and packing the kits, claim of missing parts in the kits will NOT be accepted
  • Professional installation is highly recommended. Any damage resulted from incorrect installation, improper use or lack of maintenance or accident will not be covered by the warranty.
  • The warranty will be void as Turbocharger or component are used in extreme condition like competition sports or record breaking attempts.
  • Turbocharger or component will have no warranty when it is damaged by ingestion of foreign matter.