* SPEDIZIONE ASSICURATA INCLUSA *


PEAK ELECTRONIC ESR70 GOLD/ Capacimetro +ESR tester con allarme

Tester Capacitor / ESR Analizer with audible alerts

Funziona anche solo come puro Milliohmmetro !

ULTIMO MODELLO AGGIORNATO !  (GOLD)


Range di misura ESR ( e Milliohmmetro puro) : da 0,00 a 40 Ohm

( con precisione : ±2%±0.02Ω @ < 2 Ohm ; ±2%±0.2Ω @ >2 Ohm )

Range di misura Capacità: da 0.3uF a 90.000 uF ( con precisione : ±4% ±0.2µF )


Ideale anche per i Riparatori di motori elettrici ,

per testare la qualità dei condensatori di rifasamento.


PRODOTTO ORIGINALE INGLESE, ultima VERSIONE

Certificato CE e RoHS

Manuale in Italiano


ATTENZIONE!!!

Si prega di verificare le specifiche dettagliate e i componenti che il tester può analizzare prima di fare l'acquisto !!!

CAUTION!!!

Please check the detailed specifications and components that this tester can analyze before making the purchase !!!


>> Altri strumenti disponibili nel nostro negozio:

ZEN50: Analizzatore ZENER- VDR- TVS - LED

DCA75pro: Analizzatore di Semiconduttori avanzato

DCA55: Analizzatore di Semiconduttori

SCR100: Analizzatore SCR / TRIAC

LCR45: Misuratore L-C-R

(** Custodie opzionali disponibili **)


Dotato di display LCD, Peak atlas ESR70 è un strumento in grado di misurare la Capacità e l'ESR (Resistenza Equivalente Serie) di un condensatore di qualsiasi tipo con un valore compreso tra 1 uF e 22.000 uF. Dispone di un ampio range di misura e segnali acustici.Ogni misurazione sarà visualizzata sul display e verranno prodotti una serie di toni a seconda del valore ESR. Il range di misura per l'ESR è da 0 a 40 ohm con una risoluzione a partire da 0,01 ohm. È anche possibile misurare l'ESR di un condensatore in-circuit, evitando di doverlo dissaldare. N.B. durante la misurazione in-circuit di un condensatore viene visualizzato solo il valore ESR, mentre il valore della capacità no.

Alimentazione: batteria 12 V (inclusa)

Dimensioni (mm): 103x70x20.

La confezione comprende Peak atlas ESR70 e un cavetto flessibile lungo circa 45 cm, dotato di due spine e prese da 2 mm con coccodrilli (placcati in oro).



CARATTERISTICHE TECNICHE:

  • Misura: Capacità ed ESR (Resistenza Equivalente Serie)
  • Misura in-circuit: solo l'ESR
  • Range di misura ESR: da 0 a 40 ohm
  • Risoluzione ESR: 0,01 ohm
  • Avvisi acustici: sì, per i vari livelli ESR
  • Range di misura Capacità: da 0,3uF a 90.000 uF
  • Spegnimento automatico: sì, dopo 45 secondi di inattività
  • Alimentazione: batteria 12V (inclusa)
  • Dimensioni (mm): 103x70x20

DOCUMENTAZIONE E LINK UTILI:






ENGLISH:
Measure Capacitance and ESR in one instrument
The ESR70 is the ideal tool for checking the condition of your capacitors. Great for repair and renovation work. It will measure both capacitance and ESR (Equivalent Series Resistance) at the same time. You can even measure ESR with the capacitor in-circuit.
Features
  • Measure capacitance and ESR.
  • Suitable for any capacitor type between 1uF and 22000uF including motor capacitors, smoothing capacitors, electrolytics, polypropylenes, in fact any dielectric type.
  • Automatic analysis start when applying probes to capacitor.
  • New enhanced dynamic range of 0.00 to 40.0 ohms.
  • Audible alerts for various ESR levels.
  • ESR Resolution as fine as 0.01 ohms.
  • Supports capacitors from 0,3uF to 90000uF.
  • Capable of In-Circuit measurement of ESR.
  • Polarity free, connect any way round.
  • Protected against highly charged capacitors.
  • Great for low DC resistance checking too (such as PCB short checking).
  • Supplied complete with 2mm male test leads and 2mm compatible gold plated crocs.
  • Test leads are ultra-durable and 45cm (18") long with 2mm plugs.
  • Enhanced software compensation of cable resistance.
  • Complete with comprehensive user guide.
  • Capacitor reference table included.
  • Tests at the industry standard 100kHz.
  • Long life alkaline battery fitted.
  • Auto power-off after 45 seconds if inactivity.
  • Just 103mm x 70mm x 20mm (4.1" x 2.8" x 0.8")





Includes extra-flexible test cable with gold plated 2mm plugs and sockets allowing use of different probe types. Supplied with gold plated crocs as standard, others available as an option. Cable length 450mm (18").


  • Peso conf : 160 gr