Vinyl Skin Stickers Protective Decals for PS4 Playstation 4 Console & Controller

Vinyl skin for Sony PlayStation 4 console and DualShock 4 wireless controller is printed with super-high resolution graphics and ultra viscosity.

PS4 console with faceplate and mods ps4 controller skins for PS4 games PS4 accessories are easily installed and removed. Skin for a PS4 for ps4 controller will not leave behind game decals residue. The ps4 new controller decal will prevent it from being dustproof, waterproof, oilproof, and fingerprints. PS4 remote PS4 and console custom ps4 controller decals will not scratch, fade or peel.

 

Installation Instruction:

1) Clean the unit's surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminants. Most issues of non-sticking are due to some type of oil or grease.
2) Peel one piece of PS4 Decals from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, and apply the ps4 console and controller skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time.
6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate the chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.

 

Package Contains:
-One(1)Sony PlayStation 4 Next-Gen Console Skin
-Two(2)Dualshock 4 Controllers Skins.
- Actual PlayStation and controllers not included.
PushAuction