*|MC:SUBJECT|*
We have been the UK CAME reseller since 1980's, providing the trade with expert technical support. We are happy to extend 'phone support to our Ebay customers

CAME ram arms

Rams are an economic solution for entrance gates.
CAME have a wide range to choose from
Boarded gate with AXO rams

CAME have made many ram variants over the years.
Most are still available. Call us if you need help.
The list below is roughly in release order, oldest at the bottom.
 
  • ATi new       24Vdc or 230Vac, 300 or 500mm stroke
  • AXO           24Vdc or 230Vac, 300 or 500mm stroke
  • ATS           24Vdc or 230Vac, 300 or 500mm stroke
  • AXI           24Vdc residential only, 300mm stroke
  • AXL           24Vdc residential only, 300mm stroke
  • AMICO       24Vdc or 230Vac, residential 300mm only
  • ATI old       24Vdc or 230Vac, 300 or 500mm stroke
  • KRONO       230Vac only, 300 or 500mm stroke
Most CAME ram arms are made in two stroke lengths, 300mm or 500mm. The long stroke versions are used for wider gate, or gate on more substancial posts. There are geometry examples on the manuals. Call us i you need a copy of the manual

You have the option of 230Vac motors, or 24Vdc motors, and more recently brushless motors. Each type has a different control paneL, so you must replace like for like for replacement purposes.

Low voltage motors have higher duty cycle suitable for busy multi-user sites. Low voltage control panels may be fitted with battery backup in case of power failure, and even solar powered chargers.

More recent designs use incremental encoders for safety stall sensing (obstacle detection). If your control panel does not have the encoder facility, a motor fitted with an encoder will function, but without the safety features. You should never disable the encoder safety feature without making other safety provisions. You are legally responsible for public safety and protection from any gate you make changes to, unless you are replacing like for like.

Rams can have different methods to stop the motor at each end of travel. Some have in-built limit switches, others have in-built physical stops. Stops may need re-adjusting with time. Failure to adjust may cause issues with control panels that rely on encoders to monitor position.

It is always recommended to have the gate stop against a post or ground stop. Stick to the recommended geometry, and always read the installation manual requirements as failure may void the manufacturer's warranty.

Advice and technical support from 40 years of service
Technical options
  • Choose stroke length, 300mm or 500mm.
     
  • Key unlock mechanism in case of failure by standard key.
     
  • Choose high or low duty cycle, 24Vdc or 230Vac.
     
  • Openning angle typically 130° max set by geometry.
     
  • Encoder versions provide stall sensing with the correct control panel.
     
  • 24Vdc versions can also operate during power outages.
     
  • Limit options, physical or electrical .
Quality & support
  • Proven designs from 50 years as market leader.
     
  • Easy maintenance from a network of approved installers.
     
  • Excellent technical support from 4 UK offices.
     
  • Integration with all CAME home automation and intercom ranges.
     
  • Smartphone monitoring and control with award winning CAME connect, depending on control panel.
     
PURCHASE BEFORE 2:30PM TO RECEIVE YOUR ORDER NEXT DAY!
AVAILABLE MONDAY - FRIDAY