Aftermarket Oil Filled Nylon Isolator (Coupler) 

made in USA

Direct replacement for the spring loaded noisy isolator in your 

Land Rover Jaguar 5.0 Engine supercharger

Does not fit 3.0 liter engines

2010-2013 All with the Vacuum Actuator - 47mm 

2014 All with Electronic Actuator

2015-2016  verify its 47mm or 49mm by taking supercharger apart

These solid isolator are direct replacements for the original spring isolators

Upgraded isolators are torsionally stiff for power transmission but are flexible to allow for minor misalignment, absorb shock and reduced side loads on bearings

Sized specifically for the Jaguar, Machined and Reamed 

from oil filled nylon for long life in a dry oil free environment!

We also stock Many Eaton Bearings, Eaton Couplers, Eaton Supercharger Oil, etc...

Nice How to Video

youtu.be/mSnvN_Zag-4?si=GcrhoGG8SyxXMIDi

Installation Notes:

The snout is sealed to the supercharger with RTV (silicone), scrap off the old and apply some new sparingly. There is one bolt in the snout inlet on some superchargers, see 2nd picture. The TB gasket is reusable but a new one is C2Z28265. I recommend a bolt torque of 19 ft-lb for the snout bolts.