Installation steps1. the shoe rack is aligned and flush with the edge and bottom of the door panel, and then tightened with self-tapping screws.2. Place the door panel in the correct position, and accurately mark the installation position of the rotating shaft parts with a pen.3. Note that the door panel should be raised by 5mm, otherwise the door can't move normally.4. Drill a slot hole with a diameter of about 18mm and a depth of 10mm at the mark in step 2 with a hole opener, and then knock it in to install the large rotating shaft part.5. Insert the partition and bottom plate of the shoe rack, and fix the board with self-tapping screws at the side. (The thickness of the board cannot be greater than 14mm)6. Install the door panel, install the small rotating shaft parts, and fix them with the delivered screws.7. Install the baffle components with self-tapping screws, with margins reserved, otherwise the door cannot be closed. (reserved margin algorithm: the actual door thickness plus 10mm equals the reserved margin)8. Test whether the movable cabinet door can open and close normally, and adjust it to perfection according to the actual situation. Finally, check all parts and complete the installation.SpecificationMaterial: Stainless SteelFinish Type: PolishedMounting Type: Face MountNumber: 2 PcsColor: SilverWarm TipsDue to manual measurement, please allow 1-2mm difference, thanks!
We use third-party fulfillment networks to store and ship our inventory from the warehouse closest to you. Your item may arrive in an Amazon-branded box.