NXP PN532 NFC RFID Modul V3 Kits Reader Writer Für Arduino Android Phone

Product View

Detail

 
 
 
 
NFC is a popular technology in recent years. We often heard this work
while smartphone company such as Samsung or HTC introduces their latest high-end phones.
Almost all the high-end phone in the market support NFC.

Near field communication (NFC) is a set of standards for smartphones and similar
devices to establish radio communication with each other by touching them together
or bringing them into close proximity, usually no more than a few centimeters.

For electronics geeks, we also want to use NFC technology to make our own things.
So we build this NFC RFID module. This module is built around NXP PN532.
NXP PN532 is very popular in NFC area. And the company offers much technology document to help developers.
We developed this module based on the official document. And to make things easier, we also build library for this module.

We almost break out all the IO pins of NXP532 on this module. Users could easily connect and play.
On this module, I2C is the data Interface by default. With our Arduino Sensor Shield,
it is very easy to plug and play. However, if users want to use other interface such as UART or SPI,
this module also makes it easy to break out those pins.

Feature :

1、Gilt PCB and Small dimension and easy to embed into your project

2、Support I2C、SPI and HSU (High Speed UART), Change between those modes

3、Support RFID reading and writing
SupportP2P communication with peers
Support NFC with Android phone

4、Typical Operating Distance have been updated to 5cm~7cm reading distance

5、Work in NFC Mode or RFID reader/writer Mode

6、RFID reader/writer supports:

1) 1k, 4k, Ultralight, and DesFire cards

2) ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)

3) Innovision Jewel cards such as IRT5001 card

4) FeliCa cards such as RCS_860 and RCS_854

7、Plug and play, Arduino compatible

8、Built in PCB Antenna, with 4cm~6cm communication distance

9、On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI

10、Work as RFID reader/writer

11、Work as 1443-A card or a virtual card

12、Exchange data with other NFC devices such as smartphone

Interface :

The version 3 can support I2C、SPI and HSU (High Speed UART), there is a switch can help you to change interface between those modes easily.


Hardware Connection :

If you have Sensor Shield, you could plug in and play.



And you can finish connection with Arduino by hand :

Arduino GND to PN532 Module GND

Arduino 5V to PN532 Module VCC

Arduino SDA to PN532 Module SDA

Arduino SCL to PN532 Module SCL

Dimension :



Application :

Here we introduce 3 basic example of this module.

1) Read/write RFID card

As basic function, this module could read and write RFID card. Various cards could be supported.

We also supply libraries for Arduino.


2) P2P communication


Two PN532 modules could communicate with each other wirelessly.

3) NFC with Andriod Phone


The basic communication stamp with Andriod Phone (NFC supported) is finished. Currently we could put an URL to Android phone and let it visit a webpage.


Document Download：PN532 NFC Module Manual

 

Package Included:

  • 1 x 1PCS*PN532 NFC RFID Module
  • 1 x 2.54mm spacing 4pin Cable
  • 1 x One S50 White Card
  • 1 x One S50 Key Card
  • 1 x 12P bended male pins
 

Copyright © 2017 DataDaciques

Product View

Detail

 
 
 
 
NFC is a popular technology in recent years. We often heard this work
while smartphone company such as Samsung or HTC introduces their latest high-end phones.
Almost all the high-end phone in the market support NFC.

Near field communication (NFC) is a set of standards for smartphones and similar
devices to establish radio communication with each other by touching them together
or bringing them into close proximity, usually no more than a few centimeters.

For electronics geeks, we also want to use NFC technology to make our own things.
So we build this NFC RFID module. This module is built around NXP PN532.
NXP PN532 is very popular in NFC area. And the company offers much technology document to help developers.
We developed this module based on the official document. And to make things easier, we also build library for this module.

We almost break out all the IO pins of NXP532 on this module. Users could easily connect and play.
On this module, I2C is the data Interface by default. With our Arduino Sensor Shield,
it is very easy to plug and play. However, if users want to use other interface such as UART or SPI,
this module also makes it easy to break out those pins.

Feature :

1、Gilt PCB and Small dimension and easy to embed into your project

2、Support I2C、SPI and HSU (High Speed UART), Change between those modes

3、Support RFID reading and writing
SupportP2P communication with peers
Support NFC with Android phone

4、Typical Operating Distance have been updated to 5cm~7cm reading distance

5、Work in NFC Mode or RFID reader/writer Mode

6、RFID reader/writer supports:

1) 1k, 4k, Ultralight, and DesFire cards

2) ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)

3) Innovision Jewel cards such as IRT5001 card

4) FeliCa cards such as RCS_860 and RCS_854

7、Plug and play, Arduino compatible

8、Built in PCB Antenna, with 4cm~6cm communication distance

9、On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI

10、Work as RFID reader/writer

11、Work as 1443-A card or a virtual card

12、Exchange data with other NFC devices such as smartphone

Interface :

The version 3 can support I2C、SPI and HSU (High Speed UART), there is a switch can help you to change interface between those modes easily.


Hardware Connection :

If you have Sensor Shield, you could plug in and play.



And you can finish connection with Arduino by hand :

Arduino GND to PN532 Module GND

Arduino 5V to PN532 Module VCC

Arduino SDA to PN532 Module SDA

Arduino SCL to PN532 Module SCL

Dimension :



Application :

Here we introduce 3 basic example of this module.

1) Read/write RFID card

As basic function, this module could read and write RFID card. Various cards could be supported.

We also supply libraries for Arduino.


2) P2P communication


Two PN532 modules could communicate with each other wirelessly.

3) NFC with Andriod Phone


The basic communication stamp with Andriod Phone (NFC supported) is finished. Currently we could put an URL to Android phone and let it visit a webpage.


Document Download：PN532 NFC Module Manual

 

Package Included:

  • 1 x 1PCS*PN532 NFC RFID Module
  • 1 x 2.54mm spacing 4pin Cable
  • 1 x One S50 White Card
  • 1 x One S50 Key Card
  • 1 x 12P bended male pins
 
1)All items will be shipped to your eBay Address .Please make sure to provide us with correct,precise and detailed shipping address.
 

2) Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.

But the accurate time is depend on the customs .
If you not get it on time , please don't hesitate to contact us .
 
If you need a tracking number, you could choose Standard Shipping.
We accept PayPal only.
We only ship item to your PayPal verified address.
Please pay attention that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you. We sincerely hope that you can leave us a positive comment once you received the item,We also will leave a positive feedback immediately after payment is received. If for some reason there is any issue with the purchase, please contact us through "My Messages" or "Ask Seller Questions" before leaving neutral or negative feedback,we will be glad to work with you to have it resolved.
Our working time: Monday to Friday, 9:00~18:00
Thanks for your shopping

Am 27.03.2026 hat der Verkäufer die folgenden Angaben hinzugefügt:

Datacaciques