Specifications

For Fat Bike with 26-inch x 4-inch Wheel
Rim Motor: 52V 2000W Brushless Direct-Drive Hub Motor
Wiring Method: Waterproof Wire Connection System
Maximum Speed: 65 km/h
Display: Intelligent Colorful LCD Panel Display
Controller: Intelligent Motor Controller, the Current is 40A
Riding mode: Twist Throttle Electric Assist Mode, Pedal Assist Mode
Rear Fork Width Requirement: 170mm
Disk Brake Only with 6 Holes to Mount the Disc Rotor
Brake levers: Aluminum Alloy Wuxing E-brake Lever
Rim & Spokes: Alloy Double Wall Rim, Steel Spokes
PAS Sensor: 12 Magnets Pedal Assist Sensor
Freewheel: Shimano TZ500 7 Speed Thread-on Freewheel
12 Months warranty on the Motor

Package Include :
1 x 52V 2000W Rear Rim Motor
1 x Intelligent Motor Controller
1 x Controller Bag
1 x Pedal Assist Crank Sensor
1 x Pair of E-Brake Levers
1 x Twist Throttle
1 x LCD Display
1 x Cable Ties Set
1 x Manual
1 x 7 Speed Freewheel

Important Notes
Please check your wheel size before purchasing and you can find your wheel size from the printed on the tire wall (side).
Please check your rear fork width (170mm) to make the motor hub can be fitted into it.
Battery and charger are not included in this listing. Our 2000W system requires a 52 Volt electrokinetic cell battery with a maximum continuous discharge current of not less than 40A and a nominal capacity of not less than 15Ah.
Professional installation skills are needed. Please notice that basic tools will be required when installing this DIY Kit. Otherwise, please seek a local mechanic for installation.
The AU regulations dictate that a kit must not exceed the rated power of 250W to be road-legal. 2000W Motor is not path legal, this product is recommended for off-road or private property use only.
Please noted that the rear motor hub will only suit thread-on freewheel which is up to 7 Speeds, the freewheel is included.
Speed limit and riding ranges depend on the rider's weight, road, and weather conditions.