eBay

Refrigeration Gas Tank Valve with 4.2Mpa Pressure Relief Valve for 5.2Mpa Tanks

This is a brand new Refrigeration gas tank valve with dual outlets and interchangeable pressure relief device.

This valve has 2 outlets, one is for vapour withdrawal and the other is a liquid outlet. Each of these inlet/outlets also has a colour coded and clearly marked on/off service tap.

The red tap is for liquid inlet/outlet.

The Blue tap is for vapour inlet/outlet.

Thread sealant (Everseal) is already applied to the thread for quick installation.

The liquid pick up tube can be cut down to suit smaller size cylinders.

Dust caps provided for both outlets.

This valve is compatible with R12, R134a, R410/a

Manufacturers part number: CVD2

Our Part Number RFV-DD42

This valve is manufactured by SCG one of the worlds largest valve manufacturers.

This valve Compatible with refrigeration tanks made by:

Manchester/McMillan, in water capacities: 11Ltr, 22Ltr & 46Ltr

Tube Length: 730mm

Plastic Tube Diameter: OD 14mm ID 10mm

Thread into tank size: 3/4"-14NPT

Inlet/Outlet Thread size: CGA550

Pressure Relief Valve Set to: 4.2Mpa

Please note the pressure relief valve required for the replacement valve is determined by the tank pressure rating stamped on the Id plate, refer pressure relief valve chart below. This Dual outlet valve will come standard with 3.6Mpa pressure relief valve.

Pressure relief valves available for this valve are:

2.6Mpa (P/N RFV-R26) to suit tank test pressure 3.3-3.6Mpa

3.4Mpa (P/N RFV-R36) to suit tank test pressure 4.2Mpa

4.2Mpa (P/N RFV-R42) to suit tank test pressure 5.2Mpa

1 X RFV-DD4.2 Dual tap dual outlet refrigeration valve.

WARNING

Refrigerant is a compressed and or flammable Vapour/Liquid. Only licensed, trained and competent personal should conduct any operation or repairs relating to an gas systems, Gas Component or Gas Storage Vessels.

Appliances intended to use vapour must not be supplied liquid Gas. Catastrophic failure may result.

Ensure all connections, seals, hoses and valves are clean, undamaged and in good repair prior to carrying out any operation. All connection's must be check for leaks with a non-corrosive leak detection fluid prior to operation.

Keep all Gas Storage Vessels out of reach of Children.

Improper installations and repairs could result in serious personal injury and property damage

LPG is a compressed flammable liquid. Only licensed, trained and competent personal should conduct any operation or repairs relating to an LPG systems, LPG Component or LPG Storage Vessels.
Be aware of your surroundings as LPG vapour is flammable and must be kept away from all ignition sources such as pilot lights and piezo igniters in hot water systems, open flames, cigarettes, welding and grinding sparks and any other potential ignition source. Avoid direct contact with liquid LPG as a freeze burn may result. One litre of liquid LPG expands to 270 litres of combustible vapour. Personal protective equipment must be worn when working with LPG.
Cylinders are designed to only fill to 80% of the water capacity to allow for expansion of the liquid with temperature changes. This 80% level must not be exceeded when filling an LPG Cylinder. Ensure the LPG storage vessel(s) are in date and in good repair prior to filling.
Appliances intended to use vapour must not be supplied liquid LPG. Catastrophic failure may result.
Ensure all connections, seals, hoses and valves are clean, undamaged and in good repair prior to carrying out any operation. All connection must be check for leaks with a non-corrosive leak detection fluid prior to operation.
Keep all LPG Storage Vessels out of reach of Children.
Improper installations and repairs could result in serious personal injury and property damage.

ITEMS ship by Regular postage within Australia. Express postage is also available at an additional cost. This option may be selected during check out Procedure. Larger items may ship with Direct Freight or Couriers Please as deemed suitable.
Orders ship same day, or next business day once cleared funds have been received. It is our aim to get your order to you as quickly and seamlessly as possible with minimum fuss and maximum convenience.
INTERNATIONAL: We ship to international destinations, please contact us for an international shipping quote.
Occasionally orders may be delayed in the postal service, unfortunately this is beyond our control but we use our best endeavors to resolve any issues should they arise.

Payment may be made by, PayPal, Visa, Mastercard, Bank Deposit, Efptos, or Cash on pick up.

Goods may be returned up to 30 days after purchase.
Returned Goods must be in original, un-used condition.
Goods that have been used, installed, or damaged will not be accepted for return unless deemed faulty as a result of manufacturing defect.
Postage costs are not refundable. All return postage costs are at the purchasers expense.

Products are guaranteed and warranted free from manufactures defects in the material, workmanship or design for a period of 12 Months from the date of purchase. Repairs must carried out in accordance with OEM specifications.
If you have any doubts of the correct application of this part please feel free to email or call us prior to purchasing.

Inspections welcome at our Factory in Lilydale
Factory 17/64-86 Beresford Rd
Lilydale Vic 3140
Business Hours, See below
Feel free to contact us on 1300 307 795 or email info@bluelpg.com