These 1" thick spacers are for the 4/110mm bolt pattern. They provide 1 inches of spacing per side (2 inches total). They include all necessary hardware. The nuts provided can be used to secure these spacers to the ATV so you can use your existing lug nuts to attach the new wheels to the spacers. As you can see from the design, the weight has been optimized. They only weigh 1.6lbs (.7kg) each including the steel studs and nuts. We generally do not recommend wheel spacers for use on the front of ATV's. Front wheel spacers cause the wheels to go through a forward and backward motion when going through the steering range, which can cause force feedback to the rider and a tendency to steer itself. These wheel spacers are made from Extruded Billet 6061-T6511 aluminum. Heat treated for added strength. |
-------------------------------------------------------------------------------------------------------------------------------
The goal of Diamond J Customs is to develop and offer products that add performance to the ATV without the enormous price tag found on other ATV aftermarket products. We do this by designing kits that will allow use of as many stock components as possible, and allow you to mount higher performing parts from other ATV’s on your model. These parts are often available at reasonable prices on eBay, saving you money. We've sold literally hundreds of these kits to other “Quad Fanatics” and from the feedback from customers on eBay, you can see that they have been more than satisfied with the products. We work hard to design products that maximize the performance of your ATV while keeping prices as low as possible. Safety is not something that will be compromised.
On Jan-04-09 at 10:34:04 PST, seller added the following information: