•  Item Description
  • • This listing is for one set of LED universal spoiler.
  • • This lip is very flexible and can fit to different shapes of rear roof spoiler.
  • • It comes with double side tape on the back and 2 end pieces for easy installation.
  • • Simply peel off one end of the tape, attach and press it firmly.
  • • Continue to attach the rest and use the screws to permanently secure the trunk lip.
  •  
  • Technical Parameter
  • • LED brightness matched – our LED’s are brightness matched to pair perfectly with OEM tail lights. Universal spoiler can be used for pressure tail and top wing.
  • LED Tail Brake Driving Strip Light Rear Spoiler Lip Carbon Trim Fiber Universal


    Item Description

    • This listing is for one set of LED universal spoiler.

    • This lip is very flexible and can fit to different shapes of rear roof spoiler.

    • It comes with double side tape on the back and 2 end pieces for easy installation.

    • Simply peel off one end of the tape, attach and press it firmly.

    • Continue to attach the rest and use the screws to permanently secure the trunk lip.

     

    Technical Parameter

    • LED brightness matched – our LED’s are brightness matched to pair perfectly with OEM tail lights. Universal spoiler can be used for pressure tail and top wing.

    • Flexible and durable - high flex weather resistant material. Bend, twist, and curve around any surface.

    • Water resistant - high-density waterproof material ensures your led spoiler is protected from wind/rain/snow and the elements.

    • Easy installation - 5 minute setup and quick wiring. Easy to adjust the position and cut the perfect size to match with your car.

    • Size: 50 Inches (128 cm)

     

    How To Install

    1. Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler to size.

    2. Clean the surface where you plan on mounting the LED spoiler with isopropyl alchohol and a clear microfiber cloth to ensure a firm and lasting fit. (failure to do so can result in a poor attachment surface and inproper mounting).

    3. Firmly press the LED spoiler on the mounting are and hold for 3 seconds.

    4. Power the LED spoiler and find your vehicle's corresponding wiring (please find wiring details in our online manual).


    Wiring and Function

    Yellow cable - Driving/Tail : Driving/Tail Low Red

    Red cable - Brake : Braking High Red

    Black cable - GND

     


    Item Specifics
    Brand :Unbranded
    Color :Carbon Fiber
    Placement on Vehicle :Car Trunk, Lower, Rear, Upper
    Features :Easy Installation
    Manufacturer Part Number :WYDT-TXW-1.2m
    OE/OEM Part Number :4 feet (118cm), Carbon Fiber Pattern
    Interchange Part Number :Car Spoiler/Roof/Hatch Gate/Trunk/Bonnet, LED Decoration Lights
    Manufacturer Warranty :1 Year
    Superseded Part Number :Universal For Car Rear Roof Trunk Spoiler Wing Lip
    Interchange Part Number :Car Spoiler/Roof/Hatch Gate/Trunk/Bonnet, LED Decoration Lights
    Manufacturer Warranty :1 Year
    Superseded Part Number :Universal For Car Rear Roof Trunk Spoiler Wing Lip

    Payment

    1. We only accept PayPal payment, should be received within 3 days from the date of purchase.

    2. Please keep the consistency of Paypal address and ebay address.

    3. Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .

    Shipping

    All items will be shipped in 24 hours after receiving your payment .

    Returns

    1. We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    2. All returned items should be in the original packaging , return tracking information should be provided .

    3. Buyer is responsible for return shipping cost due to the problem not caused by item quality itself.

    Contact Us

    1. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    2. We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    About Us

    Our office hours are MONDAY - Saturday 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on respons if you send message or E-Mail on Sundy.

    LED Tail Brake Driving Strip Light Rear Spoiler Lip Carbon Trim Fiber Universal


    Item Description

    • This listing is for one set of LED universal spoiler.

    • This lip is very flexible and can fit to different shapes of rear roof spoiler.

    • It comes with double side tape on the back and 2 end pieces for easy installation.

    • Simply peel off one end of the tape, attach and press it firmly.

    • Continue to attach the rest and use the screws to permanently secure the trunk lip.

     

    Technical Parameter

    • LED brightness matched – our LED’s are brightness matched to pair perfectly with OEM tail lights. Universal spoiler can be used for pressure tail and top wing.

    • Flexible and durable - high flex weather resistant material. Bend, twist, and curve around any surface.

    • Water resistant - high-density waterproof material ensures your led spoiler is protected from wind/rain/snow and the elements.

    • Easy installation - 5 minute setup and quick wiring. Easy to adjust the position and cut the perfect size to match with your car.

    • Size: 50 Inches (128 cm)

     

    How To Install

    1. Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler to size.

    2. Clean the surface where you plan on mounting the LED spoiler with isopropyl alchohol and a clear microfiber cloth to ensure a firm and lasting fit. (failure to do so can result in a poor attachment surface and inproper mounting).

    3. Firmly press the LED spoiler on the mounting are and hold for 3 seconds.

    4. Power the LED spoiler and find your vehicle's corresponding wiring (please find wiring details in our online manual).


    Wiring and Function

    Yellow cable - Driving/Tail : Driving/Tail Low Red

    Red cable - Brake : Braking High Red

    Black cable - GND

     


    Item Specifics
    Brand :Unbranded
    Color :Carbon Fiber
    Placement on Vehicle :Car Trunk, Lower, Rear, Upper
    Features :Easy Installation
    Manufacturer Part Number :WYDT-TXW-1.2m
    OE/OEM Part Number :4 feet (118cm), Carbon Fiber Pattern
    Interchange Part Number :Car Spoiler/Roof/Hatch Gate/Trunk/Bonnet, LED Decoration Lights
    Manufacturer Warranty :1 Year
    Superseded Part Number :Universal For Car Rear Roof Trunk Spoiler Wing Lip
    Interchange Part Number :Car Spoiler/Roof/Hatch Gate/Trunk/Bonnet, LED Decoration Lights
    Manufacturer Warranty :1 Year
    Superseded Part Number :Universal For Car Rear Roof Trunk Spoiler Wing Lip

    1. We only accept PayPal payment, should be received within 3 days from the date of purchase.

    2. Please keep the consistency of Paypal address and ebay address.

    3. Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .

    All items will be shipped in 24 hours after receiving your payment .

    1. We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    2. All returned items should be in the original packaging , return tracking information should be provided .

    3. Buyer is responsible for return shipping cost due to the problem not caused by item quality itself.

    1. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    2. We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Our office hours are MONDAY - Saturday 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on respons if you send message or E-Mail on Sundy.


    All rights reserved.



    On Aug 15, 2026 at 12:56:32 PDT, seller added the following information:

    Datacaciques