A Pair Spuer White LED Error Free SMD License Plate Lights For BMW E38 7Series 740i 740iL 750iL

Description







Unlike others our lights run at low temperature to prevent any damage and over heat.
Just replace your standart license plate lights with these new LED modules, no modifications required!

The LED Ultra-White modules offer great and pure light to your licens plate and give your car an unmistakably new generation appeaance.

LED License Plate Lights

  • High Quality LED Modules

  • Brand New

  • Fast & Easy Installed

  • Plug and Play

  • Perfect Fit

  • Error Free OBD

  • 50000 MCD Ultra-White

  • 7000 Kelvin

The Best On Lights The Market !!!

Perfect Upgrade to 50000 MCD Ultra-White Lights.

These high performance LED SMD Can Bus modules are state of the art.
Made by newest technology to support the electronic components of your car, ERROR FREE!

Fits the following models:

BMW E38
 


*** LEDs are polarity specific, if it does not come on after install, please reverse the polarity by turning the bulb around. ***

Shipping Estimated Time  (Please understand that international shipping need takes some time,So hope you realize it.)

 Country  Approx. Delivery time

1.) United States  (By ePacket  Expedited int'l Shipping)

 7 - 10 business days ( $3.99 )
2.) Other Country (By AirMail  Economy int'l Shipping)  10 - 20 business days ( $3.99 )
*.) Other Country (By EMS UPS DHL TNT  Expedited int'l Shipping)  7 - 10 business days (contact us)

 If you are not satisfied with our items or services,Please email us before leaving any 'negative feedback' or 'open any dispute',Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.




Installation note:

Always install the LED bulb with the power source off, to prevent blowing fuse, or grounding out the LED bulb itself, especially bulbs with metal housing.

LEDs are polarity specific: Unlike regular halogen bulb, LED bulbs are polarity specific, If the bulb fail to light up after installation, please turn off the switch that controls that particular bulb, take the bulb out, turn the bulb 180 degree (switch the polarity + / -) and reinstall the bulb, the polarity is often reversed.

Brake light and turn signal light: some LED such as the turn signal lights and brake lights may require a load resistor in the circuit to provide enough or a specific current flow to satisfy the lighting controller in your vehicle's electrical system.

194/168 peanut type wedge bulb: if you have proceed the switching polarity procedure, and the light still fail to come on, please check the two connecting pins at the bottom against the bulb socket, sometime the pins maybe sitting too far in, and not making proper contact with the bulb socket, the pins may need to be pulled out slightly for better connection.

3175, 3022, 3021 type bulb: especially the 4-SMD model of the 3175, sometime these bulbs are a very tight fit in the dome light sockets, please both side at the same time for easier fitment. 

note on bulbs with metal housing, such as 3175, 3021, 3022, 36mm, 39mm High Power LED, please be really careful during installation, if the dome light switch is at on position, or your door is open, you can easily ground out and burn the LED bulb by grounding out the positive and negative on the metal housing.  Please make sure the + and - socket in the dome light housing are not touching the mid housing on the 3175 bulb, there is two rubber ring on each side of the 3175 bulb housing to prevent that from happening.

Any further question, please feel free to contact us

Terms & Condition

The item is sold on an "as is" basis, please ask all questions before bidding to avoid getting an item you are not satisfied with.

Returned item has to be new, unworn and in its original condition.

must be returned in its original and unused condition.

Return

Return is accepted within 7 days after the buyer's receiving the item.

If this item is defective upon receipt, customer has up to 7 days from date of receipt for exchange of a new one.

After getting the returned item, we will refund the customer at the item's price ( excluding the shipping costs to and fro ).

Delivery fees will not be refunded.

Please understand that shipping and handling fee is not refundable. Buyer is responsible for shipping costs incurred shipping products back.

In no circumstances is Shipping, Handling & Insurance refunded.


Bid With Confidence!