4 Loop Guitar Effects Pedal Switcher Looper Router Looping System 
WAVE-X PXL4 black Purple color
   
           
                                                                      


 







Description


Features:


Wave-X PXL4 programmable 4 loop pedal router. 


The PXL4 is a programmable and storable effects looper.  When engaging the PXL4, just choose  your choice of tone groups and save for instant recall. These tone groups will be stored even after the power is shut down, so no constant re-assigning your favorite groups and settings. With the maximum storage of 8 groups tone, the design of TRUE Bypass of the PXL4 guarantees the smooth transfer of  signal and it avoids the effect interference caused by other electronic switches. Further, the PXL4 also has super fast switch speed and excellent low switch noise (which can be inevitable in TRUE BYPASS devices).


1.     DC 9V power supply Input Jack

2. Main Output jack

3. Effects SEND/RETURN jacks

4. Instrument Input jack

5. Store Button

6. Edit Button

7. Bank Display

8. Group A on/off Switch

9. Group B on/off Switch 

10. Bank down Switch

11. Bank up Switch

12. Group Status Indicator

13. Effects Status Indicator


 OPERATION INSTRUCTIONS

It is very simple to use the PXL series FX Pedal grouping system. Please follow the instructions
below to start your sound.

Pre-Setup:
1.Connect your effect pedals to the L1-L8 (L1-L4 on the PXL4) FX Loop. 
  Connect the SEND Jack to the FX pedal’s INPUT jack, and connect the RETURN Jack to the FX pedal’s Output Jack.
2.Connect your guitar to the PXL’s INPUT jack.
3.Connect the PXL from the OUTPUT to your amplifier's INPUT. 
4.Connect the PXL power supply and also power on all your effects pedals,turn on all the FX
  pedals connected in the PXL’s FX LOOP.
5.Power your amplifier on.
6.All the 8 LOOP channel of PXL is set to BYPASS mode and the group stauts indicator will
  flash after powered up, This means you have to choose one FX combination to start your 
sound.
7. Use the A/B/C or D switch (A/B switch only in PXL4) to turn on/off the effect group you select. By repeatedly pressing any one of those switches, you bring the unit in and out of BYPASS modee. 
NOTE:While in Bypass modee, you can not perform an EDIT operation. 
8.The BANK+ and BANK- switches allow you to toggle between banks. There are eight banks 
(1-8) available in the PXL. When any bank is changed, the group will not be switched until one of the A/B(C/D) buttons is pressed. 

NOTE: You can not perform an EDIT operation during Bank Change until you make a selection of one combination by pressing the A/B/C/D button again. 

GROUPING OPERATION OF PXL4

1.Press the EDIT button to enter the edit mode and an "E" will appear on the display indicates the PXL is now in EDIT mode.
2.Operate the A/B/BANK+ or BANK- foot switch to switch on or bypass the pedal connected in the FX Loop.
   
   Press Foot Switch A to control the L4 Loop channel. If L4 is set as On, 
   the corresponding Effect Status Indicator of L4 will be turned on. If L4 is set 
   as Bypassed, the correspond Effect Status Indicator of L4 will be turned off.

   Press Foot Switch B to control the L3 Loop channel. If L3 is set as On, the 
   corresponding Effect Status Indicator of L3 will be turned on. If L3 is set as 
   Bypassed, the correspond Effect Status Indicator of L3 will be turned off.

   Press Foot Switch BANK+ to control the L2 Loop channel. If L2 is set as On, the
   corresponding Effect Status Indicator of L2 will be turned on. If L2 is set as 
   Bypassed, the correspond Effect Status Indicator of L2 will be turned off.

   Press Foot Switch BANK- to control the L1 Loop channel. If L1 is set as On, the
   corresponding Effect Status Indicator of L1 will be turned on. If L1 is set as 
   Bypassed, the correspond Effect Status Indicator of L1 will be turned off.

3.When you have done the grouping operation, press the STORE button to store your setting. 
  If you don't want to change anything, press the EDIT button again to return to the previous settings. 
  Doing this will cancel any of the changes you have made without saving them.

 

Specifications


Dimensions :28.3(L)x8.2(W)x5.5(H) cm
Weight : 0.88Kg
color:black and purple


Payment

  •  We ONLY accept PayPal
      
  •  Please make sure your shipping address in paypal is  correct.


  • Shipping

         
    •  1.Item will be posted within 48 hours by china post ems after the  payment is cleared.
    •  2.Delivery time is 7 business days to USA,Australia, United Kingdom,germany,canada and other countries.(ship         by EMS with tracking number,workings days not included weekend and handle time) 
    •  3.SERVICE TRANSIT TIME is provided by the carrier and excludes  weekends and holidays. Transit times may vary,     particularly during the holiday  season.
    •  4.Besides your detailed shipping address, Please kindly also take down  your phone number in the paypal          note when you make payment. Phone number is very important to facilitated the delivery.
    •      and Please tell me your choose colour(black or purple) when you payment.

     



    Reference Time:(Other countries or remote areas may take longer) 

    Returns

     
    •  1.Any problems,pls try to contact us first. 
    •  2.Each message and email will be replied within 24 hours with  sincerity and honesty.

    About us

        
    •  1.Customer Satisfaction is very important to us. 
    •  2.Feedback is very important to us. We request that you contact  us immediately BEFORE you give us neutral or       negative feedback,so that we can satisfactorily address your concerns. It is impossible to  address issues if we     do not know about them!
    •  3.Any issues or problems, please send us email.Thank you.