【EU Stock & Free shipping & Free VAT】

 Offline Stand Alone 4 Axis Controller System PLC For CNC Router Lathe

Good News:

We have Germany warehouse in Germany,so we can ship your product from Germany to European Union Customers.

If Norway pls contact us confirm the shipping cost before buy!

We all use UPS,DHL,FEDEX to European Countries,thank you.

Free ship & free VAT to below Europe Countries:

Austria,Belgium,Bulgaria,CzechRepublic,Denmark,Estonia,Finland,France,Germany,Greece,
Hungary,Ireland,Italy,Latvia,Liechtenstein,Lithuania,Luxembourg,Monaco,Netherlands,Poland,
Portugal,Romania,Slovakia,Slovenia,Spain,Sweden,Switzerland,United Kingdom.

Package:

• 1 x 4 Axis CNC System Motion Controller DDCSV1.1
  
• 1 x 8GB USB Flash Drive
• 1 x USB Cable

DDCSV1 4Axis Control System G Code Machine Controller Motor CNC Driver

• 
  
• 
• 
• 
• 
• 
• 
• 

• 1.1) Introduction of Product

  The DDCSV1 is the 4 axis and 4 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.

  The DDCSV1 numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation.

  The panel layout structure of DDCSV1 is rational. The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set.

  This specificationintroduces the operation method of caving machine’s special off-line CNC system, DDCSV1 and the machine tool connection as well as operation specification. By lots of graphical representation and examples, the uses can quickly learn to use the DDCSV1 CNC system.

   

  1.2 ) Performance parameter of Product

  Ordinary digital input interface of 16-circuitoptocoupler coupling isolation

  Ordinary digital input interface of 3-circuit optocoupler coupling isolation

  Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);

  Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz;

  ARM9 main control chip;

  FPGA core algorithm chip;

  4.3 inches TFT screen, resolution ratio: 480*272;

  17 operational keys;

  The main control equipment is 18V-32V power input, the current capacity is required not to be lower than 0.5A;

  Support the USB flash disk to read the G code,and the size of G codefile has no requirement;

  Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market

• Support the panel key with single-axis manual operation, manual step and CONToperation;

• Support the operation of quickly specify the running position;

   Support the multi coordinate systems (with automatically saving function in case of power cut);

  Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down)

1.3) Outward Appearance, Structure and Size of Product

The DDCSV1.1 adopts the embedded shell structure, which can punch a square hole on the equipment cabinet and then embed this equipment in the squire hole. Use two locking mechanism from the inside can fix this equipment on the equipment cabinet, with easy installation. The dimension figure of the product’s outward appearance are as picture 1-1 and picture 1-2.

The panel size of the product is 163mm*102mm*5mm;

The size of main body is 156mm*93mm*45mm;

The size of square hole installed on the equipment cabinet is 156mm*93mm.

 

1.4) Explanation of Nouns

When operating the DDCSV1.1, the users will come across some English abbreviation. Now all the abbreviations are listed to users for references.

FRO: the FRO mainly refers to adjust the FRO value to amend the current feed rate under the situation that the F value has been confirmed before the processing course or in the processing course. The actual rate F#=setting rate F*FRO.

SRO: the SROrate mainly refers to adjust the SROrate to amend the current speed of spindle under the situation that the S value has been confirmed before the processing course or in the processing course. The actual speed of spindleS#=setting rate S* SRO.

SRJ: SRJ, under the situation that the defaultvalue ofmanual operation rate has been set, it is impossible to set the value again to amend the manual operation rate when it is required to adjust the manual operation speed and CONToperation speed. At this moment, the SRJ value can be modified to realize the purpose of amending the manual operation speed. The actual speed of manual operation FS#=setting manual operation speed SRJ*.

F: Feed rate, the unit is mm/min. For example F=2000, indicates that it can feed 2000mm per minute;

S: speed of spindle, the unit is rad/min. For example S=20000, indicates that it can rotate 20000 per minute;

X:  The coordinate code of X axis.

Y:  The coordinate code of Y axis.

Z:  The coordinate code of Z axis.

A:  The coordinate code of A axis

 

Busy: Server busy, it cannot conduct the processing operation, and parts of the function are open. For example, amend the FRO and value of SRO.

 

REDAY: REDAY mode, any operation can be done at this time, including the processing or modifying the parameter or starting the 2nd mode

 

Reset: reset mode, all the operations are forbidden to do at this time.

 

“CONT”: continuous operation, each axis can conduct the CONT operation under this mode.

 

“Step”:Manual step mode，each axis can conduct the manual step operation under this mode

 

MPG: MPGMode, each axis can conduct the MPG operation under this mode

 

AUTO: Automatic processing mode, it will show AUTO when enters the state of automatic processing.

  

1.We accept Paypal for payment.all Paypal must be confirmed (shipping and billing address must match and correct)

2.Please pay within 3 days of order.

1. We'll ship it out within in 1 or 2 days after payment verified .

2. Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.

1.Defective or wrong item will be offered replacement or refunds after offer the pictures to prove it.

2.When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.we will help you to solve all problems.

1.Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.

2.Please contact us before leaving any negative or neutral feedback.We will help you to solve any problems