MICRO BL-99V RP-99V Adsorption type Turntable
Arm Base / Rubber Belt / Instruction Manual

☆ Condition: Each part is dedicated cream, polished / cleaned.

I am polishing the cabinet with a dedicated luster wax.
The dust cover polishes with a dedicated abrasive depending on the level of scratches and polishes the finish to enhance transparency.
Platter and metal parts will polish dirt and rust until it is as beautiful as possible.

Dust cover

· Depending on the angle, a fine thread / scratch which is hard to see is left
· There is a transparent feeling and there are no cracks and it is beautiful.

Button part / platter / base

· But there is a slight dullness with the button part with aging
· There is gloss and there is no conspicuous damage.
· Platter has dullness due to aging, but it also has gloss.
· We have not found any galling or deterioration in adsorbed rubber.
· There is no conspicuous damage on arm base.

Cabinet

· There is no conspicuous damage on the whole and it is in good condition.
· Insulator / hinge is also solid.

Air pump

· Although there are fine scratches / Kokizu
· Overall, conspicuous big damage is not found.

There is no conspicuous damage in total and the state is good.
Considering the aging consideration, we judge it as non-defective on us.

It becomes second-hand goods.
Please be aware that some minor scratches / thread / use feeling accompanying aging / use is understood after understanding.

* Operation: for operation verification therefore, half day ~ 1 day. Aging. We perform.

Turntable: Good operation
Normal rotation has been confirmed with the attached rubber belt and stroboscope.

· Normal rotation, 33/45 rotation switching / speed adjustment can be done firmly.
· There is no problem with the start / stop button reaction.
· There is no problem with lighting.

Air pump: Good operation
· Connect the tube to the turntable
· Press the SUCTION button to apply pressure to the record board and the board will be chucked firmly.

※ This item is common to 50 / 60Hz.

There is no problem in all the above operations, it is a good operation goods.

※ However, since it will be a secular item, accuracy of the speed adjustment and adsorption operation
We can not guarantee the performance at the time of brand new.

☆ Product Description
Manufacturer: MICRO
Turntable model number: BL-99V
Dimension W 530 × H 200 × D 420 (mm)
Weight: 17.45 kg

Pump unit model number: RP-99V
Dimension: W175 × H120 × D295 (mm)
Weight: 3 kg

☆ Accessory
· Dust cover
· Rubber belts
· Owner's Manual (Original)
· Arm base (made by MICRO / Unknown hole diameter: about 30 mm)
· Stroboscope (MICRO)
· EP adapter

※ The thing in the photograph becomes all. Please check it.