|
2 HUB CENTRIC WHEEL ADAPTER
5X115 MM/5x115 MM
BOLT-ON WHEEL SPACERS - WIDEN YOUR WHEELS
1.5" THICK
14x1.5 THREAD SIZE STUDS
| VEHICLE BOLT PATTERN |
SAME BOLT PATTERN
 |
WHEEL BOLT PATTERN |
|
5x115 MM
|
5x115 MM
|
PRODUCT SPECIFICATION:
Set of 2 High Quality Forged 6061 Billet Hub Centric Wheel Adapters/Spacers
Hub Centric Design for a Snug Fit on Both the Vehicle and the Wheel
Stress on Bearing and Chance of Vibration is Greatly Reduced
Vehicle Side Bolt Pattern: 5x115mm
Wheel Side Bolt Pattern: 5x115mm
Thickness: 1 inch (25mm)
Studs Thread Size: 14x1.5
Open End Mounting Lug Nut: 14x1.25
Bore Diameter to Vehicle: 73mm
Bore Diameter to Wheel: 73Mm
Stud Grade: 10.9
Material: Forged 6061-T6 Aircraft Billet
Complete Kit for Installation
WHY ARE WE SPECIAL
We literally make adapters. Custom order is welcome.
Fast shipping to all US territories. We ship internationally as well.
Experienced technical staff provides professional advice.
Our great customer service guarantees a smooth and easy shopping experience.
Quality control department ensures quality and reliable products.
SPECIAL SIZE CUSTOM BUILT IN-HOUSE UPON REQUEST. MADE IN USA.
SPECIAL NOTES
Must be hand torqued at 80 ft-lbs. Avoid using air guns.
The back of the wheel must sit flush on the adapter.
If vehicle studs stick out past the surface of the adapter, it may need to be shaved down so that wheels can mount flush. They can easily be ground or trimmed.
Check how 5 lug bolt pattern is measured.
| 5-LUG |
 |
Measure from the center on one hole to the OUTER of the third hole. This is the correct way to measure a 5-lug bolt pattern.
Common mistake is to measure from the center on one hole to the center of the third hole. |
VEHICLE SIDE FITMENT
-
Chrysler: 300C [05-08]
-
Dodge: Charger [06-on], Magnum [05-on]
~
FITMENT & COMPATIBILITY IS FOR THE PURPOSE OF VERIFYING VEHICLE SIDE BOLT PATTERN ONLY
| 
