|
|
|
|
|
|
|
|
|
|
Package Include:
- 4 pieces
Length:
- Length of Sensor 1：640mm
- Length of Sensor 2:310mm
- Length of Sensor 3:mm
- Length of Sensor 4:mm
OE:
- F82M18861 F82M18861E,L5D91886ZC 18078 250-24958 19060507 234-4505
Q&A:
Q:What is Differences Between upstream and downstream O2 Sensor?
A:
- The upstream oxygen sensor is located before the catalytic converter. This measures the level of pollutants coming directly from the engine. It also senses any raw, unburned fuel coming from the combustion chambers.
- The downstream oxygen sensor is located directly after the catalytic converter. This sensor measures the pollutants making it through the converter and out of the tailpipe. The data from this sensor is compared to that of the upstream sensor. If the data between the two sensors becomes more similar, the vehicle's computer may trigger a catalyst inefficiency check engine code, which turns on the Check Engine light.
Q:When should I replace oxygen sensor ?
A:If the car fuel consumption increased significantly, the oxygen sensor failure likely, should check the sensor.
| Type of Oxygen Sensor | Range of Year | Service Interval (Advice) |
| Unheated 1 or 2 Wires | 1976 to Early-1990's | 30000 to 50000 km |
| Heated 3 or 4 Wires | Mid-1980's to mid-1990's | 60000 km |
| Modern 4 or 5 wires | Mid-1990's to Now | 100000 km |
Q:What is a California emissions sensor? How do I know if I need one?
A:
- A California emissions O2 sensor is meant for vehicles that are designed to meet California emission regulations. Such vehicles should have a sticker under the hood or on the driver’s door jamb that identify them.
Q:How should I notice when install oxygen sensor ?
A:
- Remove the tools: wrench M22
- Before install,make sure installation location surface cleaning
- Oxygen sensor installation torque is 40 ~ 50 nm, and the installation of the fat use regulations
- Fixed through the clamp,if wiring harness is longer than the original
Package Include:
- 4 pieces
Length:
- Length of Sensor 1：640mm
- Length of Sensor 2:310mm
- Length of Sensor 3:mm
- Length of Sensor 4:mm
OE:
- F82M18861 F82M18861E,L5D91886ZC 18078 250-24958 19060507 234-4505
Q&A:
Q:What is Differences Between upstream and downstream O2 Sensor?
A:
- The upstream oxygen sensor is located before the catalytic converter. This measures the level of pollutants coming directly from the engine. It also senses any raw, unburned fuel coming from the combustion chambers.
- The downstream oxygen sensor is located directly after the catalytic converter. This sensor measures the pollutants making it through the converter and out of the tailpipe. The data from this sensor is compared to that of the upstream sensor. If the data between the two sensors becomes more similar, the vehicle's computer may trigger a catalyst inefficiency check engine code, which turns on the Check Engine light.
Q:When should I replace oxygen sensor ?
A:If the car fuel consumption increased significantly, the oxygen sensor failure likely, should check the sensor.
| Type of Oxygen Sensor | Range of Year | Service Interval (Advice) |
| Unheated 1 or 2 Wires | 1976 to Early-1990's | 30000 to 50000 km |
| Heated 3 or 4 Wires | Mid-1980's to mid-1990's | 60000 km |
| Modern 4 or 5 wires | Mid-1990's to Now | 100000 km |
Q:What is a California emissions sensor? How do I know if I need one?
A:
- A California emissions O2 sensor is meant for vehicles that are designed to meet California emission regulations. Such vehicles should have a sticker under the hood or on the driver’s door jamb that identify them.
Q:How should I notice when install oxygen sensor ?
A:
- Remove the tools: wrench M22
- Before install,make sure installation location surface cleaning
- Oxygen sensor installation torque is 40 ~ 50 nm, and the installation of the fat use regulations
- Fixed through the clamp,if wiring harness is longer than the original
| Item Specifics | |
|---|---|
| Brand | SCITOO |
| Manufacturer Part Number | CNB129DF161517SG |
| Manufacturer Warranty | 1 Year |
| Interchange Part Number | F82M18861 F82M18861E,L5D91886ZC 18078 250-24958 19060507 234-4505 |
| Superseded Part Number | F82M18861 F82M18861E,L5D91886ZC 18078 250-24958 19060507 234-4505 |
| Number of Sensors | 1 |
| Wire Quantity | 4 |
| Features | Direct Fit, Easy Installation |
| Length | 470mm |
| Sensor Type | Heated |
| Placement on Vehicle | Front, Rear, Upstream, Pre-cat, Downsteam, Post-cat |
| Length of sensor 2 | 310mm |
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]
1.We accept multiple payment methods, such as VISA, Master Card, etc..
2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 7 days as auction ended or order might be delayed.
We stand behind every product we sell.
All of our brand new items come with a 30-Days money-back or exchange guarantee.
Q: How do I pay for my purchase?
A: MY store accepts VISA, Master Card, etc..
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]
1. We will leave a feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
Shop Category New List Item
Hot Item
Warranty
|
Downstream O2 Oxygen Sensor For Mazda 3 2011-2013 Mazda 5 2012-2015 2.5L
Q:What is Differences Between upstream and downstream O2 Sensor? A:
Q:When should I replace oxygen sensor ?
Q:What is a California emissions sensor? How do I know if I need one? A:
Q:How should I notice when install oxygen sensor ?
Shipping
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order. Payment
1.We accept multiple payment methods, such as VISA, Master Card, etc.. 2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 7 days as auction ended or order might be delayed. Returns
We stand behind every product we sell. Customer Services
Q: How do I pay for my purchase? Feedback
1. We will leave a feedback once we get your payment. Copyright of SCITOO-AutoParts . All rights reserved. |
