Durabak Inside Under Truck Coating Paint Boat Indoor Smooth Light Grey 1 Qt DIY
DESCRIPTION
This listing is for 1 Quart of Durabak SMOOTH LIGHT GREY NON UV Paint.
For over 25 years, Durabak™ has been helping customers get PRO RESULTS IN A DIY PACKAGE! Durabak heavy-duty all-in-one formulation provides a bed liner paint for any surface needing protection from the elements or rough cargo loads. Whether it’s brushed on, rolled on, or sprayed on, do-it-yourself Durabak smooth and textured paint coats, protects, and adds years to the life of your truck or boat. Great for rejuvenating an old, scratched vehicle, or simply changing the color and texture!
WHY OUR FORMULA WORKS
- Bonds to most surfaces
- Easy to apply additional coats at any time
- Weather and heat resistant
- Durable: lasts for years
- Waterproof and resistant to saltwater
- Non-slip texture even when wet
- Resists Fuel and Chemical Damage
- Flexible Absorption & Comfort, Even on Bare Feet
- Anti-corrosive
- Resists Chips, Cracks and Feeling
- Rust-proof
DURABAK™ Spec Sheet
DURABAK™ NON-SLIP SAFETY COATING SPECIFICATIONS
DURABAK™ NON-SLIP SAFETY COATING SPECIFICATIONS
DESCRIPTION:
DURABAK™ is a tough, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough-textured finish. When exposed to atmospheric moisture, DURABAK™ undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is also available in a smooth version without the rubber granules. Both DURABAK™ (aromatic version) and DURABAK 18™ (aliphatic version) may be used for indoor and outdoor applications. However, as DURABAK™ may experience some degree of fade in outdoor applications, DURABAK 18™ is recommended for maximum UV protection under these conditions. DURABAK™ will chemically bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fiberglass, metal, rubber and sound-painted materials. Some metal and extremely porous surfaces may need to be primed. DURABAK™ can be applied by roller, brush or spray. DURABAK™ can give a relatively smooth or rough surface, depending on application technique.
USES:
DURABAK™ has many applications for commercial, military and civilian use. DURABAK™ protects surfaces from foul weather elements and harsh chemicals, while creating a non-slip surface on: pedestrian walkways/truck beds/ramps and loading docks/bridges/metal and wooden steps/catwalks/ship decks/marine applications/pleasure boats/storage tanks/floors/handicap ramps/pools and spas/sealing rusty pipes/playgrounds/freight elevators/tool handles/roofing/vehicle undercoating/curb ramps/parking lots
ADVANTAGES:
One-Part No mixing of components
Totally Flexible Never chips, flakes or peels
Repairable Bonds to itself
Protection Water proof
Resistant to acid, chemicals, UV exposure, salt water
Fast Drying Very short inter-coat time
Foot traffic in 6 to 12 hours
Economical Lasts for years; no need to remove old DURABAK when re-coating
PHYSICAL PROPERTIES:
Polyurethane
Weight per gallon, pounds 10
Viscosity, Kreb units 67-72
Percent solids by weight 66%
Application temperature range 32 F to 95 F
Application thickness, 2 coats dry 29-39mils
Flexibility total flexibility
Resilience resilient in dry state
Abrasion resistance Tabor wheel, 1000 gr load, 1000 cycles 30.5
Fire resistance Flame spread ASTM E-162: 01 Smoke generation ASTM E662: 06
Salt water resistance 100%
Freeze-thaw resistance –60 F to +254 F
Pot life 3 hours
Shelf life min. 1 year
Flash time 1½ to 3 hours
Walk time 6 to 12 hours
Time between coats ± 1 hour
Full cure ± 4 days
VOC 2.08 lbs/gal
DOT Hazmat Info. Paint, 3, UN1263, PG III