Welcome to Top-E-Engine !   

We are an official registered company

and can give you the best service.

please View my other items in my store



 EPROM Programmer PCB5.0E+27C256/27c512

　

Hardware Description:

    Programmer hardware design is based on  PCB5.0
    Use PC USB Port or 9-12V AC/DC power adapter as power source
    VPP  votage can be adjusted continuous ,it is important for programming to some chips ！
    Best for updating & repairing PC motherboard and addon card BIOS.
    Build-in PLCC32 FLASH and PLCC32 Firmware HUB/LPC socket on main board！
    Support CHIPS (EPROM, EEPROM, FLASH, I2C,PIC, MCS-51,AVR, 93Cxx, ISP)

　

standard  Package Included:

　

1. one Dual Power  EPROM Programmer pcb5.0 main Board
 
2. DB25 parallel cable

3. USB Power Cable

4. Programmer software  and manual in English
we will send software to you from internet after you receive the programmer

    software support 98 / ME / NT / 2000 / XP /WIN7 32BIT

5. ONE PIECE 27C256 or 27c512 ( NO PAY)

supported chips list


　
EPROM(on main board) 27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040,27C1001
M27C1001, M27C2001, M27C4001
27C080 (A19) ,M27C801,M87C257
2716(Vpp25V),2732
2764, 27128, 27256, 27512, 27010,
Vpp12.5V or Vpp21V
EEPROM(on main board) 28C65,28C64, 28C128, 28C256,28C512, 28C010, 28C020, 28C040
M28C16A/17A (DIP28)
(Adapter or Jumper) 28C16,XLS2816 (DIP24)
FLASH Memory(on main board) 28F64, 28F128, 28F256, 28F512,28F010, 28F020
MX26C1000, MX26C2000, MX28F1000, MX28F2000
Am28F256A, Am28F512A, Am28F010A, Am28F020A (New command erase/prog.)
-- intel ---
i28F001BX, 28F004, 28F008, 28F016
FLASH Memory ( dip on main board , plcc32 need the adapter for pcb3.0 , pcb5.0 do not need the adapter )
 29F64, 29F128, 29F256, 29F512,29F010, 29F020, 29F040, 29F080
29F001,29F002, 29F004, 29F008, 29F016, 29F032
Serial (I2C) EEPROM
24Cxx (on main board)		 24C02,24C04,24C08,24C16, 85C72, 85C82, 85C92
--- page write ----
24C32,24C64,24C128,24C256,24C512
Microwire EEPROM
(on main board)		 <------ Data 8bit -----> (pin 6 ->ORG. [Schematic connect to GND])
93C06, 93C46, 93LC46, 93C56, 93C57,
93C66, 93C76, 93C86 (8bit), AT59C11, AT59C22, AT59C13
CAT35C102, CAT35C104, CAT35C108 (pullup pin7)
<------Data 16bit------> (pin 6 ->NC [No Connect])
93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS)
MicroChip PIC 16C84 , 16F84 ,16F84A , 16F627/16F628
12C508/A , 12C509/A , 12CE518 , 12CE519 , 16C505
16C620 , 16C621 , 16C622 , 16CE623 , 16CE624 , 16CE625 , 16C710/711
---Via ICSP connector (you need an optional PIC adapter in order to program these newly added PICs)----
16F870 , 16F871 , 16F872 , 16F873 , 16F874 , 16F876 , 16F877 PIC16F873A , PIC16F874A , PIC16F876A , PIC16F877A
-Add PIC microchip 14bit
PIC12F629 , PIC12F675 , PIC16F630 , PIC16F676 , PIC12F635 , PIC12F683 , PIC16F636 , PIC16F684 , PIC16F688
PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit,12bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674
PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67
PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A
PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926
PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 14bit
PIC12F629/675 , PIC16F630/676 , PIC12F635/683 , PIC16F636/684/688 , PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674 , PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67 , PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A , PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926 , PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 12bit (FLASH memory)
PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57
-Add PIC18Fxxx
PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458
PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320
PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720
PIC18F2331 , 18F2431 , 18F4331 , 18F4431
PIC18F6525 , 18F6621 , 18F8525 , 18F8621
PIC18F6585 , 18F6680 , 18F8585 , 18F8680
PIC18F2439 , 18F2539 , 18F4439 , 18F4539
PIC18F6410 , 18F8410 , 18F6490 , 18F8490
Add PIC18Fxxx
PIC18F2410 , PIC18F2420 , PIC18F2455
PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585
PIC18F2610 , PIC18F2620 , PIC18F2680
PIC18F4410, PIC18F4420 , PIC18F4455
PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585
PIC18F4610 , PIC18F4620 , PIC18F4680
Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676)
Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785)
Fixed Programming PIC all
Test on chip
PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74
PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819
PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A,
eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW
PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431
Atmel Flash Memory
(Sector Programming)
(Software Data Protection)


( dip on main board , plcc32 need the adapter for pcb3.0 , pcb5.0 do not need the adapter )

 AT29C256, AT29C512,AT29C010A, AT29C020, AT29C040,AT29C040A
W29EE512,W29EE011, W29EE012, W29C020(128),W29C040
PH29EE010(W29EE011)

ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020)
Ver 0.992 up(DOS). Can run under win9x
(disable prog. CPUIdle or CPUCool)

Atmel Flash Memory
AT49Fxxx (Subset 29Fxxx)
(Byte-by-Byte Programming)
(Software Data Protection)

( dip on main board , plcc32 need the adapter for pcb3.0 , pcb5.0 do not need the adapter )

 Command seq. 5555/AA, 2AAA/55, 5555/A0
AT49F512, AT49F010, AT49F020, AT49F040
SST39SF010, SST3S9F020 ,SST39SF040
AT49F001,AT49F002 , AT49F008A

Command seq. 555/AA, 2AA/55, 555/A0
Am29F512, Am29F010, Am29F020, Am29F040,HY29F080
29F002, 29F002T, Pm29F002T
SPI Flash Bios chips

on main board

new function for pcb5.0
    • --- WINBOND ---
      W25X010 , W25X020 , W25X040 , W25X080 , W25X16 , W25X32 , W25X64
    • --- MXIC ---
      MX25L512 , MX25L1005 , MX25L2005 , MX25L4005A , MX25L8005A , MX25L1605 , MX25L3205 , MX25L6405
    • --- EON ---
      EN25B05 , EN25B10 , EN25B20 , EN25B40 , EN25B80 , EN25B16 , EN25B32 , EN25B64
      EN25P05 , EN25P10 , EN25P20 , EN25P40 , EN25BP80 , EN25P16 , EN25P32 , EN25P64
      EN25D80 , EN25D16 , EN25F20 , EN25F40 , EN25F80 , EN25F16
    • --- AMIC ---
      A25L05P-B , A25L10P-B , A25L20P-B , A25L05P-T , A25L10P-T , A25L20P-T , A25L512
      A25L010 , A25L020 , A25L040 , A25L080 , A25L016 , A25L032
    • --- p FLASH ---
      Pm25LV512 , Pm25LV010 , Pm25LV020 , Pm25LV040 , Pm25LV080 , Pm25LV016
      --- Numonyx (ST) ---
      M25P05 , M25P10 , M25P20 , M25P40 , M25P80 , M25P16 , M25P32 , M25P64 , M25PE10 , M25PE20 , M25PE40 , M25PE80 , M25PX80 , M25PX16 , M25PX32 , M25PX64
    • --- SPANSION ---
      S25FL004A/040A , S25FL008A , S25FL040A-T , S25FL040A-B , S25FL016A , S25FL032A , S25FL064A
--- ATMEL ---
AT25DF021 , AT25DF041A , AT25DF081 , AT25DF081A , AT25DF161 , AT25DF321A , AT25DF641

　

Serial Peripheral Interface (SPI)
EEPROM Mode0 (0,0)
AT25xxx, W95xxx

 on main board

 [Atmel] AT25010,020, 040 (A8-A0)
AT25080, 160, 320, 640, 128, 256 (A15-A0)
[ST] W95010....256, Microchip 25x010 - 25x640

--- Byte programming
25010,25020,25040
--- Page programming
25C080,25C160,25C320,25C640,25C128,25C256,25C512
AT25HP256,AT25HP512
AT25HP1024 (24bit address)
　

-- CAT64LCxxx (16bit DATA IN/OUT) use Socket 93Cxxx
CAT64LC010, CAT64LC020, CAT64LC040

Atmel EEPROM (page prog.)
(Software Data Protection)		 AT28C256, AT28C010, AT28C040
Nonvaltile SRAM (DS12xx) DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB
static RAM (Test RAM) 6116, 6264, 62256, 62512, 628128
EPROM winbond,SST
Electrical Erase Chip

on main board

 W27E512, W27E010, W27C010, W27C020, W27C040
SST27SF256, SST27SF512, SST27SF010, SST27SF020
MX26C4000
Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040
Flash Memory SST,Sanyo SST28SF040A ,LE28F4001
　

all kinds of adapters

(according to your needs to selected and pay more )



　

Atmel AT89Cxx (MCS-51)
Adapter 32pin to MCS-51

Adapter MCS-51 / AVR + PLCC44   

Atmel Auto Setect
AT89C51,52,55, AT89LV51,52,55
AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53
AT89C1051,AT89C2051,AT89C4051 (20pin)
AT89C51RC (32KB), AT89C55WD (6.2V)

Intel Auto Select
i87C51, i87C51FA, i87C51FB
------------------------------------------------
i8xC51,i8xC52,i8xC54,i8xC58 (tWP = 100uS*25 Pulse)
Atmel AVR 8-bit RISC AT90Sxxx
(Parallel programming)
Adapter 32pin to MCS-51 		(read,write,erase,verify,checkempty,Lockbits ,Fusebits) [Flash memory/EEPROM]
AT90S1200,AT90S2313

reference AT90S2313 pin
Function Lockbit read AT90S2313 Errata Sheet.pdf
MCS-48,MCS-41
Adapter 32pin to MCS-48/41		 ROM (read/verify)
P8048AH, P8049AH,P8050AH, P8042AH Vea = 12V
P8041, P8042
　

OTP (read/verify/Progam)
P8748,P8749H,P8742H Vea = 18V

EPROM (read/verify/Progam)
D8748,D8749,D8742,D8741, D8742 Vea = 18V
　

FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48 8/16bit)		 Am29F400,Am29F800,29F160,29F320 (read,write byte mode)
HY29F200, HY29F400, HY29F800 , AT49F2048A, AT49F4096A, AT49F8192A
FLASH memory 8/16bit (Vpp12V)
(Software Data Protection)
Adapter (TSOP48 8/16bit)
 　
EPROM 16bit (DIP40) (1-4Mbit)
Adapter Eprom 16bit
Eprom only
　		 27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002),
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)
　
EPROM 16bit (DIP42) (4-32Mbit)
Adapter Eprom DIP42
Eprom only
　		 M27C400(DIP40), 27C800, 27C160, 27C322
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)
　
FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48LV 8/16bit)		 29LV200, 29LV400,29LV800,29LV160,29LV320 (read,write byte mode)
　
Firmware Hub / LPC FLASH
Adapter Firmware Hub/LPC (PLCC32) (PP mode) (3.3V)
　		 -- Firmware Hub
82802AB, 82802AC, AT49LW040, AT49LW080

SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A
W49V002FA, W39V040FA

-- LPC flash
SST49LF020, SST49LF040
W49V002A, W39V040A

P28F002BC
Adapter P28F002BC (DIP40)
　		 BOOT BLOCK FLASH MEMORY
- P28F002BC
　
　

1. PCI E socket to parallel port adapter for  willem programmer---18us$

  if your pc has not a parallel port .you can use this adapter to add a parallel port for willem   programmer

Suitable PC card socket type:  PCI-E 1X, PCI-E 4X, PCI-E 8X, PCI-E 16X,

PC main board  need has at least one PCI-Express socket

Driver support xp,win7 32bit,


PCI-E-socket-to-parallel-port-adapter-for-printer-programmer-U82

  

Note : your PC must has a PCI-Express socket . this can not be used PCI socket .

What difference of PCI and PCI-E socket , Please watch below picture

 


2.    Three in one  Adapter  ---5 $

3 IN 1

        Include(     DIP32------PLCC32Adapter 

        DIP28------PLCC32  Adapter 
        FHW/LPC    Adapter    )

 

Adapter DIP32 to PLCC32

  1.        EEPROM : 28/28C512,010,020,040
  2.        EPROM : 27C010,020,040,080
  3.       Flash memory : 28F/29C/29F/39F/49F512,010,020,040,001,002,004
  4.         support chip 3.3V(29LVxx, 28FxxxB3) by select jumper on adapter

Adapter Firmware HUB / LPC

  1. FWH : 82802AB/AC, SST49LF002/0030/004/008, AT49LW040/080 ,W39V040FA,W49V002FA,
  2. LPC : SST49LF020/030/040/080 ,  W39V040A ,W49V002A,

Adapter DIP28 to PLCC32

  1. EEPROM : 28/28C16A,64,128,256
  2. EPROM : 27C64,128,256,512
  3. Flash memory : 28F/29C/29F/39F/49F64,128,256

 

 

3 .Adapter MCS-51 / AVR + PLCC44  ----8$

51-AVR-adapter+ 

1

 

Atmel AT89Cxx (MCS-51) Adapter 32pin to MCS-51
Atmel Auto Setect : AT89C51/52/55 , AT89LV51/52/55
AT89S8252 (8K+2K) AT89S53 , AT89LS8252 , AT89LS53
AT89C1051, AT89C2051, AT89C4051 (20pin) , AT89C51RC (32KB)
AT89C55WD, (6.2V) SST89C54/58 , SI89C52
IntelAuto elect : i87C51, i87C51FA , i87C51FB
i8xC51 i8xC52 , i8xC54 , i8xC58 (tWP = 100uS*25 Pulse)

 

         2. Atmel AVR 8-bit RISC AT90Sxxx (Parallel programming) Adapter 32pin to MCS-51
     (read,write,erase,verify,checkempty,Lockbits ,Fusebits) [Flash memory/EEPROM]
     AT90S1200 , AT90S2313 , 90S2333 , 90S4433 , 90S4414 , 90S8515
      90S4434 , 90S8535 Reference AT90S2313 pin

 

4. simple PIC Adapter ----3$

pic4

5 .Adapter TSOP48 (LV 8/16bit)+ Adapter TSOP40B+Adapter TSOP32 ----45$

Use together with  TSOP48 GENERAL Socket A

                        1

 

     -----   TSOP32 (**,20mm)  Adapter---(**,20mm)  package

1 Qty = (Adapter TSOP32  )
    Use together with  TSOP48 GENERAL Socket A 

      

 support  :

  • EEPROM : 28/28C512,010,020,040

  • EPROM : 27C010,020,040,080

  • Flash memory : 28F/29C/29F/39F/49F512,010,020,040,001,002,004

  • voltage 3.3V(27LVxx,29LVxx, 28FxxxB3)

     ------   Adapter TSOP40B(**,20mm)


    1 Qty = (Adapter TSOP40B )
    Use together with  TSOP48 GENERAL Socket A 

      

          Suport : MBM29F017A , MBM29F016A , MBM29F080 , 28F008SA , 29F004S5 ,

               29F032 , Am29F080 , Am29F016B , Am29F016 , Am29F017B , Am29F065MU

 

 

The TSOP 40 Adapter is made with Yamaichi TSOP 48 ZIF socket and double sided PCB, it supports both 5 V and 3.3 V Flash Memory and programming in BYTE mode.

 

 .  ------Adapter TSOP48 (LV 8/16bit)(**,20mm)


     1 Qty = (Adapter TSOP48 (8/16bit)  )

 

 

     Suport :   Am29F200,Am29F400,Am29F800,Am29F160(16M,5V),     Am29F320,Mx29F100
  HY29F200,HY29F400,HY29F800,AT49F2048A,AT49F4096A,AT49F8192A,AT49F8011, AT49LV1614 
 
AT49LV1614 , 29LV200, 29LV400,29LV800,29LV160,29LV320

            (read,write byte mode) 

The TSOP 48 Adapter is made with Yamaichi TSOP 48 ZIF socket and double sided PCB,

 it supports both 5 V and 3.3 V Flash Memory and programming in BYTE mode.


    Use together with  TSOP48 GENERAL Socket A 

 

 

6.  Adapter mini TSOP32 (8mm,14mm)---35$

 

tsop32-mini-1

 

   support : sst 39sf020,sst 39sf040  , sst 39vf020,sst 39vf040 and so on ,mini tsop 32  (8mm,14mm)package.

 

 
 

7.  27Cxxxx ( EPROM 16bit ,1-4Mbit ) Adapter  ( DIP40)---8$

     

DIP40-EPROM

 

 

         support : 27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002),
         ,DIP 40 package.

 

8.  27Cxxxx ( EPROM 16bit ,4-32Mbit ) Adapter  ( DIP42)---10$

 

DIP40-EPROM2-2

 

 

    support : M27C400, 27C800, 27C160, 27C322
         ,DIP 42 package.

 

10. programmer online adapter--II   for sop8 chip ,

         24c** ,93c** ---18 us$

 

Test Clip-2

 

 

 

 

11.  Willem Programmer Adapter PSOP44 SOP44 29F200 29F800---30us$

 

1-EBAY

   

Willem Programmer Adapter : PSOP44 SOP44 -DIP32

Description:

* Supports Standard, Enhanced, Advanced, PCB3X , PCB4x

   Willem EPROM Programmer

* Supports Am29F200, Am29F400, Am29F800 and

    3.3V 29LV200, 29LV400 & 29LV800

* Supports 28F200, 28F400 & 28F800

 

15.  PLCC Extractor  ----1.5$

PLCC

 

16 .  sop8--dip8  adapter  ---   5us$

SOP8 socket adapter can be used for universal programmers(TOP, Xelltek,  Labtool, Elnec ......)  , Patch size : 1.27mm , this adapter fit the narrow SOIC (3.8mm 150mil body ) 

sop8