http://www.longs-motor.com

Skype:chenpeijuan2010

E-MAIL:cherry@longs-motor.com

 What's in Box?

  3 PCS Nema 34 Stepper Motor with Single shaft 1600oz-in holding torque,

    3 PCS Stepper Driver DM860A  with 7.8A replacing MD882,

    3 PCS  Power Supplies for  350W,60VDC,

    1 PC Breakout Board,

    1 PC DB25 Cable

Moreover,we are looking for distributors in the world,if you are intrrested in our programme,please contact us!Let's grow together!!!

Detailed information :

1. Nema 34 stepper motor:

eBay Image Hosting at www.auctiva.com


Model
Step angel ( ° )
Motor Length L(mm)
Rate Voltage
(V)
Rate Current (A)
 Phase Resistance ( Ω )
Phase Inductance (mH)
Holding Torque (oz.in)
Lead Wire (NO.)
Rotor Inertia
(kg. c?)
 Motor Weight (kg)
 34HS5435C-37B2
 
1.8
151
5.7
3.5
1.9
22
1600
4
3.6
5
 


 
2.Stepper motor driver:

Detailed pic:

eBay Image Hosting at www.auctiva.com

 

Technical Specification:

1. Stepper motor driver DM860A:

http://www.longs-motor.com/ProductsView.asp?id=273&pid=83

Introduction:
  DM860A  is a type  of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Features:
l         High performance, low price
l         Average current control, 2-phase sinusoidal output current drive
l         Supply voltage from 24VDC to 80VDC
l         Opto-isolated signal I/O
l         Overvoltage, under voltage, overcorrect, phase short circuit protection
l         14 channels subdivision and automatic idle-current reduction
l         8 channels output phase current setting
l         Offline command input terminal
l         Motor torque is related with speed, but not related with step/revolution
l         High start speed
l         High hording torque under high speed
 
3. Power Supply:
 
The power is 350W, the output voltage is 60VDC.
 
4. Breakout Board:

More quatities, More discounts!!

Our Stepper Motors are used on small to mid-sized CNC mills & milling machines, CNC lathes, Pick-n-place machines, Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters. These motors have been used in precision telescope positioning systems and robots.