-
Category - Coilover/Shock Absorber
- Turbochargers
- Brake Calipers
- Injector Harness
- Valve Parts
- Ignition Coilpacks
- Oil Line
- Sunshade
- Connectingrods
- Air Suspension
- Steeringparts
- Carburetors
- Exhaust Manifold
- Oxygen Sensor
- Air Bag
- Camber Plates
- Control arm
- Engine Gaskets
- Oil Pump
- Hydraulic Roller Lifters
- Smog Air Pumps
- Turbo Cartridges
- oilcooler
- Cylinderpistonkit
- Transmission
- Engine Motor
- Air Fuel Ratio Sensor
- Starter Motor
- Air Intake Hose
- Timing Tool Kit
- fuelpump
- Windshield Wiper Motor
- Glass Hinge
- Other
Parautoecommerce
Front&Rear Ceramic Brake Pads Kit for Buick Encore 2013-2017 Verano 2012-2017
Front&Rear Ceramic Brake Pads Kit for Buick Encore 2013-2017 Verano 2012-2017

Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Front & Rear Premium Brake Pads Kit
Application:
| Make&Model | Year | Note |
|---|---|---|
| For Chevrolet Cruze | 2011-2013 | Models with Rear Disc |
| For Chevrolet Cruze | 2014-2015 | 4-Wheel Disc Brakes; GAS Engine; Brake Code J67 |
| For Chevrolet Cruze Limited | 2016 | 4-Wheel Disc Brakes |
| For Chevrolet Orlando | 2012-2014 | Canada ONLY |
| For Chevrolet Sonic | 2013-2014 | 4-Wheel Disc Brakes |
| For Chevrolet Sonic | 2015 | All Models |
| For Chevrolet Sonic | 2016 | LTZ, RS |
| For Chevrolet Sonic | 2017 | All Models |
| For Chevrolet Trax | 2013-2017 | All Models |
| For Chevrolet Volt | 2011-2015 | All Models |
| For Buick Encore | 2013-2017 | All Models |
| For Buick Verano | 2012-2017 | All Models |
OE/Part number:
P1522,P-1522,D1522,1522,
P1468,P-1468,D1468,1468
Specification:
| Installation position | Front Side | Rear Side |
| Condition | New | New |
| Backing Material | Steel | Steel |
| Pad Material | NAO Ceramic | NAO Ceramic |
| Pad Shims Included | Yes | Yes |
| Mounting Hardware Included | Yes | Yes |
| Mounting bolt | No | No |
| Lubricant Included | Yes | Yes |
| Pad Wear Sensor Included | Yes | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 148.2 (±0.3) | 116.6 (±0.3) |
| Inner Pad Height(mm) | 60.3 (±0.3) | 42.7 (±0.3) |
| Inner Pad Thickness(mm) | 17.5 (-0.5) | 15.6 (-0.5) |
| Outer Pad Width(mm) | 148.2 (±0.3) | 116.6 (±0.3) |
| Outer Pad Height(mm) | 60.3 (±0.3) | 42.7 (±0.3) |
| Outer Pad Thickness(mm) | 17.5 (-0.5) | 15.6 (-0.5) |
| Packaging Type | Box | Box |
| Fitment | Direct Replacement | Direct Replacement |
* Products manufactured under an IATF 16949 quality management system
✔ AMECA- and NSF-tested brake pad solutions for the U.S. aftermarket
✔ Quality-checked components for consistent braking performance
✔ Designed for reliable aftermarket replacement applications
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
4x- Front Brake Pads
4x- Rear Brake Pads
Features:
● Heat dissipation cuts thermal fade for stable braking
● Ceramic formula resists thermal fade
● Multi-layer shims reduce squeaking
● Shorter stopping distance in emergencies
Notice:
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● If shaking, usually not installed correctly, try to instal again
● We suggest that you seek professional installation to avoid unnecessary trouble.
