New Martzis HID Interface USB Card USB Board PC Via BUS For Linux EMC / Mach 3
Mach3 USB-Schnittstellenkarte mit On-Board-USB- Schnittstelle und passende USB-Kabel. Dieses Handbuch Steuerkarte ist weithin bekannt für CNC-Konsole, Schaltkasten, Handrad und manuell gesteuert Box, etc. verwendet
-
Inputs:
- 64 digital inputs (LS TTL)
- 4 encoder inputs (1x or 2x)
- 4 analog inputs (0-5V)
- 4 analog inputs can measure a voltage between
0-5V. A potentiometer can be connected directly to these inputs. The center wire is
connected to the input pin and two other wires to ground and 5V connectors.
- 4 encoder inputs can be configured to work in 1X
or 2X mode.
- Encoder inputs can also be used as pulse
counters. In 1X mode A channel counts either rising or falling edges if B channel is
connected permanetly to 5V or ground. In 2X mode card counts both rising and falling edges
if the signal is connected to both A and B channel.
- All 64 digital 5V logic inputs are pulled up via
LS TTL internal resistors. A simple switch can be connected directly between input and
groud.
