TEGO ROOFING SUPPLY

St. Charles, MO 63301

"Over 30 years experience in single ply flat roofing products!"

 This 10' X 15' 45 Mil R EPDM black rubber roofing weighing 53 lbs

We have latex bonding adhesive that is necessary to adhere the EPDM rubber to the roofing insulation or substrate. These bonding adhesives have a coverage of about 100-120 square feet per 1 gallon pail as a ONE SURFACE WET APPLIED LAMINATE

 When buying EPDM rubber roofing you also need to purchase the proper accessories from us to insure a proper and complete roof installation. We have listed all our EPDM accessories in our EBay store.

We have both WHITE and BLACK EPDM rubber roofing. 

  
EPDM is extremely flexible, much like a tire innertube, and extremely strong. EPDM has over 350% elongation, and it's performance characteristics are stable in temperature ranges from -50 to 240 degrees Fahrenheit before failure. The EPDM membrane also exhibits over 1,300 lbs psi tensile strength, and 150 psi tear strength. Though there are other types of roofing membrane material in the marketplace today, none of them meet all the positive characteristics, ease of handling, and price of EPDM.

FORMULATION

COLOR	SPECIAL APPROVALS
ANJ45B & ANJ60B MIL EPDM	BLACK	UL CLASS A FM CLASS 1
ANJ60W 60 MIL EPDM	WHITE	UL CLASS A FM CLASS 1
PHYSICAL PROPERTIES	ASTM TEST METHOD	RESULTS
WIDTH, INCHES	D751	-0 / +2.0
LENGTH, INCHES	D751	-0 / +6.0
THICKNESS, INCHES	D751	+10%
TENSIL STRENGTH, MIN PSI	D412    D1E C	1305
ELONGATION, ULTIMATE MIN. %	D412	300
TEAR RESISTANCE, MIN., LBS./INCH	D624    DIE C	150
LINEAR DIMENSIONAL CHANGE,  MAX. % (168 HOURS AT 2400 DEGREES F)	D1204	+2
BRITTLENESS POINT AT -49 DEGREES F	D2137	DOES NOT BREAK
OZONE RESISTANCE (168 HOURS / 100 PPHM/1040 F/400 C/505 EXT.)	D1149	NO CRACKS AT 7X MAGNIFICATION
WATER ABSORBSION, MAX. % (168 HOURS AT 15 DEGREES F/70 C)	D471	+8 / -2.0
HEAT AGING (28 DAYS AT 240 DEGREES F)
PIN HOLES	NO HOLES, COMETS, OR FISH EYES MORE  THAN 1/3 DEPTH OF TOTAL THICKNESS
SEAMS	2" MIN. OVERLAP
SEAM PEEL STRENGTH 2 INCH / MIN. CROSSHEAD SPEED	15 PLI MIN.
SEAM SHEAR STRENGTH 2 INCH / MIN. CROSSHEAD SPEED	(BREAK MUST BE MEMBRANE NOT SEAM 30 PLI MIN.)